Read Sony KDL-26P5500 Service Manual online
- 8 -
2-6. Speaker Removal
To remove the speakers disconnect the speaker wire
harness , remove the one screw circled from the bracket
and ease the complete assy away from the TV set.
harness , remove the one screw circled from the bracket
and ease the complete assy away from the TV set.
Screw
To remove the speakers from the speaker bracket,
remove the 4 screws circled and separate the speaker
from the bracket.
remove the 4 screws circled and separate the speaker
from the bracket.
Screw
The procedure is identical for both speakers.
2-7. H2 Board Removal
Disconnect the wire harness, release the clip circled and
ease the H2 board away from the TV set.
ease the H2 board away from the TV set.
Remove the Speakers (See Sec 2-6).
2-8. Side Jack Bracket Removal
Release the 2 clips indicated and gently pull the bracket
away from the A board in the direction of the arrow.
away from the A board in the direction of the arrow.
Clip
Clip
Screw Part number(s) and Description(s)
2-580-640-01 SCREW, +BVTP2 4 X 16
4 Screws
Screw Part number(s) and Description(s)
2-580-640-01 SCREW, +BVTP2 4 X 16
1 Screw
2-5. H1 Board Removal
To remove the H1 board from the bracket, disconnect the
wire harness, remove the 2 screws circled and lift the board
out of the bracket.
wire harness, remove the 2 screws circled and lift the board
out of the bracket.
Remove the Key Board sub assembly by pushing towards
the panel and lifting out of its guide boss.
the panel and lifting out of its guide boss.
Screw Part number(s) and Description(s)
7-685-504-19 SCREW, +BTP 2 X 6
2 Screws
Click on the first or last page to see other KDL-26P5500 service manuals if exist.