Read Sony KDL-24W605A / KDL-32W503A / KDL-32W600A / KDL-32W603A / KDL-32W605A / KDL-32W650A / KDL-32W651A / KDL-32W653A / KDL-32W654A / KDL-32W655A / KDL-32W656A / KDL-40W905A / KDL-42W650A / KDL-42W651A / KDL-42W653A / KDL-42W654A / KDL-42W655A / KDL-42W656A / KDL Service Manual online
4-1. SI SELECTION SETTING (Applicable only for GA Hotel Model )
13
SETTING HOTEL MODELS
SECTION 4
Notes:
Procedure described in this should be applied after B*** Board exchange
process for GA Hotel Model (with RS232C Control) .
process for GA Hotel Model (with RS232C Control) .
By executing the procedure described in this Appendix, RS232C Control
protocol will be set to appropriate mode (Locatel/VDA/SonyStandard).
(Default setting of service board is “No Serial”)
protocol will be set to appropriate mode (Locatel/VDA/SonyStandard).
(Default setting of service board is “No Serial”)
4-2. Procedure to Set HOTEL RS232C Protocol
1. Access Hotel Setting Mode by pressing the buttons when TV in Standby.
“DISPLAY
“DISPLAY
MUTING Vol+ POWER” on the remote commander.
Hotel Mode Settings in process
2. Enter to [HOME]
[Settings] [Hotel Mode] and select [SI mode selection]
Maximum Volume
Initial Volume
Initial Volume
Line-out Offset
SI mode selection
BathSP Initial Volume
Initialize Hotel Settings
Export Hotel Settings
Sony standard
Locatel
VDA
No serial
Hotel Mode Settings in process
3.
Select appropriate protocol from the list.
4.
Power OFF
ON
5.
Confirm SI mode selection setting in [Settings
]
6.
Finish
< NOTE >
• To exit Hotel Mode (for Guest), press the buttons when TV in Power ON.
“DISPLAY
• To exit Hotel Mode (for Guest), press the buttons when TV in Power ON.
“DISPLAY
MUTING Vol+ Home” on the remote commander.
• To exit Hotel Setting Mode, press the buttons when TV in Standby.
“DISPLAY
“DISPLAY
MUTING Vol- POWER” on the remote commander.
• “Cloning” is also available for this Protocol setting. In case you use “Cloning”
instead of this procedure, please check SI mode selection setting after “Cloning”.
• Reboot is required to activate this Protocol setting.
instead of this procedure, please check SI mode selection setting after “Cloning”.
• Reboot is required to activate this Protocol setting.
Normal Mode
Hotel Setting Mode
Hotel Mode (for Guest)
Click on the first or last page to see other KDL-24W605A / KDL-32W503A / KDL-32W600A / KDL-32W603A / KDL-32W605A / KDL-32W650A / KDL-32W651A / KDL-32W653A / KDL-32W654A / KDL-32W655A / KDL-32W656A / KDL-40W905A / KDL-42W650A / KDL-42W651A / KDL-42W653A / KDL-42W654A / KDL-42W655A / KDL-42W656A / KDL service manuals if exist.