Read Sony KDL-22EX310 / KDL-32EX310 / KDL-42EX410 Service Manual online
KDL-22/32EX310, 42EX410(AEP/UK)
8
SELF DIAGNOSIS FUNCTION
DIAGNOSTIC TEST INDICATORS
When an error occurs, the STANDBY LED will flash a set number of times to
indicate the possible cause of the problem.
indicate the possible cause of the problem.
If there is more than one error, the LED will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen.
If the screen displays a “0”, no error has occurred .
The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED will automatically begin to flash.
The number of times the LED flashes translates to a probable source of the problem.
A definition of the STANDBY LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these
problems occur.
The number of times the LED flashes translates to a probable source of the problem.
A definition of the STANDBY LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these
problems occur.
STBY LED
Flash time
Service menu Item
name
(Screen Display)
Diagnostic Item Description
2
MAIN_POWER
Main Power Over Voltage Protection
DC_ALERT1
DC_ALERT
AUDIO_PROT
Audio Abnormal Detection
TUNER_ERR
Tuner Error
4
-
Not used
5
PANEL_POWE
Not used
6
BACKLIGHT_ERR
Back Light Error (Panel Inverter)
7
TEMP_ERR
Thermal Error
8
-
Not used
9
-
Not used
10
-
Not used
11
-
Not used
12
-
Not used
3
0.5
0.5
3
DISPLAY OF STANDBY LED FLASH COUNT
SELF-DIAGNOSTIC SCREEN DISPLAY
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of failure for
confirmation on the screen:
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of failure for
confirmation on the screen:
[To Bring Up Screen Test]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
5
*
: Note that this differs from entering the service mode (volume +)
*
Info
TV POWER
Channel
Volume
Click on the first or last page to see other KDL-22EX310 / KDL-32EX310 / KDL-42EX410 service manuals if exist.