KDL-22EX308, KDL-32EX308 - Sony TV Service Manual (repair manual). Page 19

Read Sony KDL-22EX308 / KDL-32EX308 Service Manual online

KDL-22EX308/32EX308
14
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et 
une marque 
!
 sont critiques pour la securite. 
Ne les remplacer que par une piece portant le 
numero specifie.
NOTE: The components identified by shading 
and 
!
 mark are critical for safety. Replace only 
with part number specified. 
NOTE: The components identified by a red outline and a   mark contain 
confidential information. Specific instructions must be adhered to whenever 
these components are repaired and/or replaced. 
See Appendix A: Encryption Key Components in the back of this manual. 
 
REF. NO.  
PART NO. 
DESCRIPTION 
[ASSEMBLY INCLUDES]
 
REF. NO.  
PART NO. 
DESCRIPTION 
[ASSEMBLY INCLUDES]
(Check the 
Sony Electronics Service Information
 website for any additional service related issues for this model.)
1-3.  BAL BOARD, GD1/G2LE (POWER) BOARDS, SIDE JACK BRACKET, MAIN BRACKET 
SPEAKER BRACKETS, SPEAKERS, HLR BOARD AND PANEL REMOVAL
1-3-1.  KDL-22EX308
 
151 
X-2546-968-1 
BEZEL (CY22_BM) ASSY
 
152 
N/A 
LCD PANEL
 
 
FOR ALL LCD PANEL PART NUMBER INFORMATION
 
 
REFER TO THE LCD PANELS SERVICE MANUAL
 
153 
4-181-666-01 
BRACKET, MAIN (22)
 
154 
1-474-204-11 
GD1 (POWER) BOARD, COMPLETE
  155 
A-1761-473-A 
BAL BOARD, COMPLETE
 
NOTE: For BAL Board replacement, please refer to section  
 
2-2. Setting the Destination after Replacing the BAL Board.
 
NOTE: Final software is not installed on this BAL Board. The latest software update  
 
must be downloaded from the Sony Electronics Service Information website  
 
at: http://www.sony.com/asp. Install the update after replacing this board using the  
 
instructions provided with the software.
 
156 
4-166-286-01 
BRACKET, SIDE JACK
 
 
2-580-640-01 
SCREW, +BVTP 4X16 TYPE2 IT-3
 
 
2-580-590-01 
SCREW, +PSW M3X5
 
 
2-580-629-01 
SCREW, +BVST 3X8
A
  Remove 2 screws from Main Bracket to detach from Bezel Assembly
B
  Remove 4 screws from BAL Board to detach from Main Bracket
C
  Slide-out Side Jack Bracket to remove from BAL Board
D
  Remove 4 screws from GD1 (Power) Board to detach from Main Bracket
E
  Remove 4 screws from Main Bracket to detach from Panel
F
  Carefully Lift up Panel to remove from Bezel
A
B
C
D
F
E
151
152
156
154
155
153
Page of 37
Display

Click on the first or last page to see other KDL-22EX308 / KDL-32EX308 service manuals if exist.