Read Sony KDL-20S4000 / KDL-26S4000 / KDL-32S4000 / KDL-37S4000 Service Manual online
SERVICE MANUAL
LCD Digital Colour TV
Australia Model
EG1L
CHASSIS
KDL-20S4000/26S4000/32S4000/37S4000
RM-GD004/GD004W
KDL-20S4000
KDL-26S4000/32S4000/37S4000
KDL-20/26/32/37S4000 (AUS) 2
SPECIFICATIONS
Model name
KDL-20S4000
KDL-26S4000
KDL-32S4000
KDL-37S4000
System
Panel system
LCD (Liquid Crystal Display) Panel
TV system
Analogue: B/G, I, D/K
Digital: DVB-T
Digital: DVB-T
Colour/video system
Analogue: PAL, PAL60, SECAM, NTSC3.58/4.43 (only video input)
Digital: MPEG-2 MP@ML/HL
Digital: MPEG-2 MP@ML/HL
Channel coverage
Analogue:
B/G: VHF: E2 to E12 / UHF: E21 to E69 /CATV: S01 to S03, S1 to S41
VHF:
VHF:
0 to 12, 5A, 9A / UHF: 28 to 69 /CATV: S01 to S03, S1 to S44 (Australia only)
VHF:
1 to 11 / UHF: 21 to 69 /CATV: S01 to S03, S1 to S41 (New Zealand only)
I:
UHF: B21 to B69 / CATV: S01 to S03, S1 to S41
D/K: VHF: C1 to C12, R1 to R12 /UHF: C13 to C57, R21 to R60 /CATV: S01 to S03, S1
to S41, Z1 to Z39
Digital: VHF/UHF
Sound output
5W + 5 W
10 W + 10 W
Input/Output jacks
Antenna
75 ohm external terminal for VHF/UHF
1
S video input (4-pin mini DIN)
1, 2, 3
Video input (phono jack)
1, 2, 3
Audio input (phono jacks): 500 mVrms, Impedance: 47 kilohms
1/
2
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Y:
Y:
1 Vp-p, 75 ohms, 0.3V negative sync/P
B
/C
B
: 0.7 Vp-p, 75 ohms/
P
R
/C
R
: 0.7 Vp-p, 75 ohms
HDMI IN 1, 2, 3
Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
Audio: Two channel linear PCM
32, 44.1 and 48 kHz, 16, 20 and 24 bits
Analogue audio input (minijack): 500 mVrms, Impedance: 47 kilohms (HDMI IN 3 only)
Video output (phono jack)
DIGITAL AUDIO OUT (OPTICAL) (digital optical jack)/Audio output (phono jacks)
PC IN
(RGB)
PC Input (D-sub 15-pin)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
PC audio input (minijack)
i
Headphones jack
USB port
Power and others
Power requirements
220 V – 240 V AC, 50 Hz
Screen size (measured
diagonally)
diagonally)
20 inches (Approx.
50.9cm)
50.9cm)
26 inches (Approx.
66.1cm)
66.1cm)
32 inches (Approx.
80.0cm)
80.0cm)
37 inches (Approx.
94.0 c m)
94.0 c m)
Display resolution
1,366 dots (horizontal)
×
768 lines (vertical)
Power consumption
Indicated on the rear of the TV.
Dimensions*
(w
(w
× h × d)
(with Table-
Top Stand)
Top Stand)
529
×
396
×
169 mm
675
×
511
×
242 mm
809
×
584
×
242 mm
931
×
656
×
279 mm
(without Table-
Top Stand)
Top Stand)
529
×
393
×
99 mm
675
×
466
×
97 mm
809
×
542
×
99 mm
931
×
609
×
110 mm
Mass*
(with Table-
Top Stand)
Top Stand)
9 kg
13 kg
17 kg
21 kg
(without Table-
Top Stand)
Top Stand)
8 kg
10 kg
14 kg
18 kg
* Dimensions and mass are approximate values.
Design and specifications are subject to change without notice.
Optional accessories
—
SU-WL100 Wall-
Mount Bracket
Mount Bracket
SU-WL500/SU-WL50B Wall-Mount Bracket
SU-FL300M TV stand
SU-FL300M TV stand
KDL-20/26/32/37S4000 (AUS) 3
PC in put signal reference chart for PC IN
(RGB) jack
• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC input does not support interlaced signals.
• This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency. For other signals, you
• This TV’s PC input does not support interlaced signals.
• This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency. For other signals, you
will see the message “NO SYNC”.
PC in put signal reference chart for HDMI IN 1, 2, 3 jack
Resolution
Horizontal
frequency (kHz)
frequency (kHz)
Vertical
frequency (Hz)
frequency (Hz)
Standard
Signals
Horizontal
(Pixel)
(Pixel)
×
Vertical
(Line)
(Line)
VGA
640
×
480
31.5
60
VGA
640
×
480
37.5
75
VESA
720
×
400
31.5
70
VGA-T
SVGA
800
×
600
37.9
60
VESA Guidelines
800
×
600
46.9
75
VESA
XGA
1024
×
768
48.4
60
VESA Guidelines
1024
×
768
56.5
70
VESA
1024
×
768
60.0
75
VESA
WXGA
1280
×
768
47.4
60
VESA
1280
×
768
47.8
60
VESA
1280
×
768
60.3
75
1360
×
768
47.7
60
VESA
SXGA
1280
×
1024
64.0
60
VESA
Resolution
Horizontal
frequency (kHz)
frequency (kHz)
Vertical
frequency (Hz)
frequency (Hz)
Standard
Signals
Horizontal
(Pixel)
(Pixel)
×
Vertical
(Line)
(Line)
VGA
640
×
480
31.5
60
VESA
SVGA
800
×
600
37.9
60
VESA Guidel ines
XGA
1024
×
768
48.4
60
VESA Guidel ines
WXGA
1280
×
768
47.4
60
VESA
1280
×
768
47.8
60
VESA
SXGA
1280
×
1024
64.0
60
VESA
KDL-20/26/32/37S4000 (AUS) 4
CAUTION
These servicing instructions are for use by qualified service
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
personnel only.
To reduce the risk of electric shock, do not perform any servicing
other than that contained in the operating instructions unless you
are qualified to do so.
WARNING!!
An isolation transformer should be used during any service to
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.
avoid possible shock hazard, because of live chassis.
The chassis of this receiver is directly connected to the ac power
line.
!
SAFETY-RELATED COMPONENT
WARNING!!
Replace all components with Sony parts whose part numbers
appear as shown in this manual or in supplements
published by Sony.
appear as shown in this manual or in supplements
published by Sony.
WARNINGS AND CAUTIONS
SAFETY-RELATED COMPONENT
WARNING
It is essential that all critical parts be replaced only with the part
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.
number specified in the electrical parts list to prevent electric
shock, fire, or other hazard.
NOTE: Do not modify the original design without obtaining
written permission from the manufacturer or you will
void the original parts and labor guarantee.
void the original parts and labor guarantee.
USE CAUTION WHEN HANDLING THE LCD PANEL
When repairing the LCD panel, be sure you are grounded by
using a wrist band.
using a wrist band.
When repairing the LCD panel on the wall, the LCD panel must
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of
be secured using the 4 mounting holes on the rear cover.
1) Do not press on the panel or frame edge to avoid the risk of
electric shock.
2) Do not scratch or press on the panel with any sharp objects.
3) Do not leave the module in high temperatures or in areas of
3) Do not leave the module in high temperatures or in areas of
high humidity for an extended period of time.
4) Do not expose the LCD panel to direct sunlight.
5) Avoid contact with water. It may cause a short circuit within
5) Avoid contact with water. It may cause a short circuit within
the module.
6) Disconnect the AC power when replacing the backlight (CCFL)
or inverter circuit.
(High voltage occurs at the inverter circuit at 650Vrms.)
(High voltage occurs at the inverter circuit at 650Vrms.)
7) Always clean the LCD panel with a soft cloth material.
8) Use care when handling the wires or connectors of the inverter
8) Use care when handling the wires or connectors of the inverter
circuit. Damaging the wires may cause a short.
9) Protect the panel from ESD to avoid damaging the electronic
circuit (C-MOS).
