Read Sony KDL-19M4000 Service Manual online
17
KDL-19M4000
KDL-19M4000
2-1. RESETTING TO FACTORY DEFAULTS AFTER BOARD REPLACEMENT
Traditional Service Mode is not available in this chassis. The only option for service technicians is to reset all of the settings to the Factory Default from
the Self Diagnostic screen.
the Self Diagnostic screen.
CAUTION: Resetting the TV to the Factory Defaults will over-write all customer settings including Parental Lock setting. Before performing this reset,
contact the customer to determine what adjustments they have made.
contact the customer to determine what adjustments they have made.
1. Turn on the TV.
2. While holding down the button on the remote control, on the TV press and hold the MENU button until “reset” displays at the bottom left corner of
the screen.
The TV turns itself off, then turns back on again.
The Initial Setup screen displays.
3. Use the Initial Setup screen options to reset the TV to the factory settings.
RM-YD025
SECTION 2: SERVICE ADJUSTMENTS
Button
☛
Click on the first or last page to see other KDL-19M4000 service manuals if exist.