Read Sony KDE-V42A12U / KE-V42A10E Service Manual online
After removing ESD assembly, put on it with
aluminum stuff on the conductive surface to
prevent charging.
Do not use chemical stuff using Freon. It
generates positive electric that can damage
ESD.
Must use a soldering device for ground-tip
when soldering or de-soldering ESD.
Must use anti-static solder removal device.
Most removal device do not have antistatic
which can charge a enough positive electric
enough damaging ESD.
Before removeing the protective material
from the lead of a new ESD, bring the
protective material into contact with the
chassis or assembly that the ESD is to be
installed on.
When handing an unpacked ESD for
replacement, do not move around too much.
Moving (legs on the carpet, for example)
generates enough electrostatic to damage
the ESD.
Do not take a new ESD from the protective
case until the ESD is ready to be installed.
Most ESD have a lead, which is easily
short-circuited by conductive materials
(such as conductive foam and aluminum)
- 8 -
Click on the first or last page to see other KDE-V42A12U / KE-V42A10E service manuals if exist.