Read Sony KDE-V42A12U / KE-V42A10E (serv.man2) Service Manual online
– 13 –
AT2X
RM-EA001 / RM-ED001
Assigns a channel name of your choice up to five letters or numbers. The name will be
displayed briefly on the screen when the channel is selected. (Names for channels are usually
taken automatically from Analogue Text (if available).)
displayed briefly on the screen when the channel is selected. (Names for channels are usually
taken automatically from Analogue Text (if available).)
1
Press OK to select “Programme Labels”.
2
Press
M/m to select the channel you want to name, then press OK.
3
Press
M/m/</, to select the desired letter or number (“s” for a blank
space), then press OK.
If you input a wrong character
Press
M/m/</, to select %/5 and press OK repeatedly until the wrong character is
selected. Then, press
M/m/</, to select the correct character and press OK.
4
Repeat the procedure in step 3 until the name is complete.
5
Press
M/m/</, to select “End”, then press OK.
Do the following options.
1
Press OK to select “AV Preset”.
2
Press
M/m to select the desired input source, then press OK.
3
Press
M/m to select the desired option below, then press OK.
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“ATT”, press PROG +/- to select the
programme number with the channel. You cannot select a programme number that is set to
skip (page 32).
programme number with the channel. You cannot select a programme number that is set to
skip (page 32).
1
Press OK to select “Manual Programme Preset”.
2
Press
M/m to select one of the following options, then press OK.
Programme Labels (Analogue mode only)
AV Preset
Option
Description
Label
Assigns a name to any equipment connected to the side and rear
sockets. The name will be displayed briefly on the screen when the
equipment is selected.
sockets. The name will be displayed briefly on the screen when the
equipment is selected.
Press
M/m to select one of the following, then press OK.
Equipment labels: Uses one of these preset labels.
Edit: Creates your own label. Follow steps 3 to 5 of “Programme
Labels” (page 30).
Edit: Creates your own label. Follow steps 3 to 5 of “Programme
Labels” (page 30).
Skip
Skips an input source that is not connected to any equipment when
you press
you press
M/m to select the input source.
After selecting this option, press OK.
Manual Programme Preset (Analogue mode only)
Connecting optional equipment
Using Optional Equipment
You can connect a wide range of optional equipment to your TV. Connecting cables are not supplied.
Connecting to the TV (side)
To connect
Do this
S VHS/Hi8/DVC
camcorder
camcorder
A
Connect to the S video socket
6 or the video socket
6,
and the audio sockets
6. To
avoid picture noise, do not connect
the camcorder to the video socket
the camcorder to the video socket
6 and the S video socket
6 at the same time. If you
connect mono equipment, connect
to the L/G/S/I socket
to the L/G/S/I socket
6, and set
“Dual Sound” to “A” (page 24).
Headphones
B
Connect to the
i socket to listen to
sound from the TV on headphones.
6
(MONO)
R/D/
D/D
L/G/
S/I
//
Headphones
S VHS/Hi8/DVC
camcorder
camcorder
To connect
Do this
Modem connector
C
C
For future use only.
Conditional Access
Module (CAM)
Module (CAM)
D
To use Pay Per View services. For
details, refer to the instruction
manual supplied with your CAM.
To use the CAM, press the eject
button and remove the “dummy”
card. When you do not use the
CAM, we recommend that the
“dummy” card be inserted and
kept in the CAM slot.
details, refer to the instruction
manual supplied with your CAM.
To use the CAM, press the eject
button and remove the “dummy”
card. When you do not use the
CAM, we recommend that the
“dummy” card be inserted and
kept in the CAM slot.
MODEM
500mA
5V
CAM eject
button
button
Continued
Click on the first or last page to see other KDE-V42A12U / KE-V42A10E (serv.man2) service manuals if exist.