Read Sony KD-65S9005B Service Manual online
KD-65/75S9005B(CEI/CEL/UKA)
125
SAVE CHANGING DATA 1 (Only when B* board is replaced)
1) In “Digital” service mode
1) In “Digital” service mode
(
“002 MODEL”
category)
000 SEG Select segment information
001 DEST
Select destination information
002 MODELNAME
Select Model Name
003 SERIAL Can be set Only Once for the new board
005 VAR_TYPE Select variable information
a.
Change data for each model.
b.
Press
“Mute”
, “0” on remote
sequentially
. Red “
WRITE
” is shown. This indicates writing is in process.
c.
After a while, red “
WRITE
” disappears. Green Done will be displayed
for a while, which means writing process is done.
ADJUSTMENT
d.
For the items SEG, DEST, MODELNAME and
VAR_TYPE, after changing each item, service save
(“mute”+”0”) is required. For the item SERIAL, after
inputting the serial number, press key “12” or “Enter” to
save the data.
VAR_TYPE, after changing each item, service save
(“mute”+”0”) is required. For the item SERIAL, after
inputting the serial number, press key “12” or “Enter” to
save the data.
–
Please save the items according to the sequence “SEG ->
DEST -> MODELNAME ->VAR_TYPE”
DEST -> MODELNAME ->VAR_TYPE”
–
When Saving the item "SEG", sometimes instead of
"Writing", the word "Pending" will appear. In this case, skip
"SEG", saving "DEST“, "MODELNAME“ and
“VAR_TYPE” is OK.
"Writing", the word "Pending" will appear. In this case, skip
"SEG", saving "DEST“, "MODELNAME“ and
“VAR_TYPE” is OK.
Please refer “RB2G WW Service Update Procedure for Panel, Board and
Software” (manual P/N 9-888-155- ) in TISS for details.
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
HS_BASE
Write
VIDEO:STANDARD AUDIO:STANDARD
PSAVE:STANDARD
MAIN: SUB:
TUNER/----/---- ----/----/NTSCU
----X----/----- ----X----/-----
-----/--- -----/---
PSAVE:STANDARD
MAIN: SUB:
TUNER/----/---- ----/----/NTSCU
----X----/----- ----X----/-----
-----/--- -----/---
Click on the first or last page to see other KD-65S9005B service manuals if exist.