Read Sony KD-55X8501C Service Manual online
HOW TO ENTER THE SERVICE MODE
1) Turn on the main power switch to set in standby mode.
2) Press the buttons on the remote commander in the following sequence with each
interval within 1 sec, then the service mode will be set.
3) Service mode display.
KD-55/65/75X8501C (FW-55/65/75X8570C), 8505C, 8507C, 8508C, 8509C
125
SEC 2. ADJUSTMENT
>>
>>
>>
>>
>>
>>
>>
[</>] Set [Home]Exit
General Setting
Tuner
Wifi
Service Mode
Model Information
Self diagnosis History
Video / Audio
Panel / PQ
4) How to use the remote commander.
5) After entering service mode, then turn off the power switch.
Function
The flow of control
Service mode on
<Display><5><Vol Up><Power>
Service mode off
<MENU>/<HOME>
Item up / down
<↑>/ <↓>
Item select left/right
<←>/<→>
Execute
<OK>
Summary of key behavior
Key
Behavior
Menu
Close service menu
Cursor/Enter
Return Previous page, Change potion of focus item,
Enter next page of focus item, etc..
Enter next page of focus item, etc..
Return
Return to previous page, close service menu etc..
KD-55/65/75X8501C (FW-55/65/75X8570C), 8505C, 8507C, 8508C, 8509C
126
ADJUSTMENT
SOFTWARE VERSION
1) In Service Mode, select “Model Information”, press “Enter” or → button to enter Status Information.
2) Press “Enter” or “Return” button to return to Service Mode.
2) Press “Enter” or “Return” button to return to Service Mode.
>>
>>
>>
>>
>>
>>
>>
[</>] Set [Home]Exit
General Setting
Tuner
Wifi
Service Mode
Model Information
Self diagnosis History
Video / Audio
Panel / PQ
>>
>>
>>
>>
>>
>>
>>
[</>] Set [Home]Exit
General Setting
Tuner
Wifi
Service Mode
Model Information
Self diagnosis History
Video / Audio
Panel / PQ
>>
Model Information
>>
Model Number Setting
>>
SERIAL NUMBER EDIT
[</>] Set [Home]Exit
Model
Status Information
>>
Main Micro
PKG2.011.0010NAB
0001 UC2
V1.000
102100006
AQ1.100
00.00.00.00
0
0
0
CameraVID:
CameraPIC:
CameraFW:
SW Version:
NVM Version:
Boot Version:
PQ Version:
AQ Version:
exFRC:
SF1.002
MLFW:
<Ext>
4k BE
SF0.360
MAFW:
SF0.501
ADSP
SD0.370
NDAT
SD0.370
PDAT
SD1.011
BDAT
SD-------
BCM
SD0.002
FDAT
SD0.000
UDAT
SD0.370
BDIX
Model Number Setting
Serial Number Edit
_ _ _ _ _ _ _
Mode
Status Information
>>
Model Information
>>
Model Number Setting
Serial Number Edit
9 9 9 9 9 9 9
Service Mode
Status Information
>>
Model Information
>>
Yes
No
Input Data correct?
>>
>>
>>
>>
>>
>>
>>
>>
>>
[</>] Set [Home]Exit
General Setting
Tuner
Wifi
Service Mode
Self diagnosis History
Video / Audio
Panel / PQ
Model Information
KD-55/65/75X8501C (FW-55/65/75X8570C), 8505C, 8507C, 8508C, 8509C
127
ADJUSTMENT
SERIAL NUMBER EDIT (1)
1) In “Service Mode”, select “Model Information” by pressing “↑” or “↓” then pressing “Enter” or
“→” button to enter inside.
2) Select “Serial Number Edit” by pressing “↑” or “↓” button then pressing “Enter” or “→” button
3) Press “↑” or “↓” to input numbers.
4) After user input data , press <Enter> .
“→” button to enter inside.
2) Select “Serial Number Edit” by pressing “↑” or “↓” button then pressing “Enter” or “→” button
3) Press “↑” or “↓” to input numbers.
4) After user input data , press <Enter> .
• Pop-up dialog appear to confirm input data correct
• Serial Number can be set
• Serial Number can be set
ONLY ONCE
5) Press “→” or “←” button to select YES or NO. Select YES if input data is correct. Select NO if
input data is incorrect. Press <Enter> to save answer.
KD-55/65/75X8501C (FW-55/65/75X8570C), 8505C, 8507C, 8508C, 8509C
128
ADJUSTMENT
SERIAL NUMBER EDIT (2)
If
YES is selected
, the input data is saved into EEPROM.
SERIAL NUMBER EDIT is greyed out and the serial number that has been input is displayed.
User will
User will
not able to edit
anymore.
If
NO is selected
, the input data is not saved into EEPROM.
The serial number that has been input is displayed.
User can still edit the Serial Number.
User can still edit the Serial Number.
<[
]>
Model Number Setting
KDL-40X500B
Serial Number Edit
9 9 9 9 9 9 9
Service Mode
Status Information
>>
Model Information
>>
<[
]>
Model Number Setting
KDL-40X500B
Serial Number Edit
9 9 9 9 9 9 9
Service Mode
Status Information
>>
Model Information
>>
Yes
No
Input Data correct?