KD-43X8301C, KD-43X8305C, KD-43X8307C, KD-43X8308C, KD-43X8309C, KD-49X8005C, KD-49X8301C, KD-49X8305C, KD-49X8307C, KD-49X8308C, KD-49X8309C, KD-55S8005C, KD-55S8505C, KD-55X8005C, KD-55X8501C, KD-55X8505C, KD-55X8507C, KD-55X8508C, KD- - Sony TV Service Manual (repair manual). Page 9

Read Sony KD-43X8301C / KD-43X8305C / KD-43X8307C / KD-43X8308C / KD-43X8309C / KD-49X8005C / KD-49X8301C / KD-49X8305C / KD-49X8307C / KD-49X8308C / KD-49X8309C / KD-55S8005C / KD-55S8505C / KD-55X8005C / KD-55X8501C / KD-55X8505C / KD-55X8507C / KD-55X8508C / KD- Service Manual online

Point 
Details/Remarks/Notes 
 
 
 
 
 
 
 
 
 
Input change is only 1 time in initial blank status(All "Null"). Be carefull not to make a mistake ! 
 
 
 
 
 
 
 
 
 
Press Left/Right arrow key to choose <0. SoC to T-con> or <1. T-con to SoC >. 
Don't forget to press <Enter> key. Even if you don't change the setting, it must be required to press <Enter> key at each item. 
After above operation step, press Up/Down arrow key to choose "Start", and press <Enter> key.  
Wait 15sec and more to finish data transfer.  
Appendix 
Serial Number Edit 
HDD Re-register 
[JP/AEP/AUS/NZ only] 
WB/Mura/CUC data 
transfer 
Execute this command with connecting 
HDD-USB. 
Repeat it until all HDD used is 
registered. 
     - Forgetting registration -> Recorded 
contents cannot be seen.  
      - Unknown HDD -> Error display 
* Not register from UI because HDD 
will be formatted. 
B-board 
replace 
T-con 
replace 
Panel 
replace 
WB/ 
Gamma 
1.T-con to 
Soc 
0.SoC to 
T-con 
0.SoC to 
T-con 
Mura 
1.T-con to 
Soc 
0.SoC to 
T-con 
1.T-con 
to Soc 
CUC 
1.T-con to 
Soc 
0.SoC to 
T-con 
1.T-con 
to Soc 
Page of 11
Display

Click on the first or last page to see other KD-43X8301C / KD-43X8305C / KD-43X8307C / KD-43X8308C / KD-43X8309C / KD-49X8005C / KD-49X8301C / KD-49X8305C / KD-49X8307C / KD-49X8308C / KD-49X8309C / KD-55S8005C / KD-55S8505C / KD-55X8005C / KD-55X8501C / KD-55X8505C / KD-55X8507C / KD-55X8508C / KD- service manuals if exist.