Read Sony KD-34XBR970 Service Manual online
11
KD-34XBR970
KD-34XBR970
1-1. REAR COVER REMOVAL
SECTION 1: DISASSEMBLY
1-2. CHASSIS ASSEMBLY REMOVAL
1-3. SERVICE POSITION
Rear Cover
CAUTION! - Heat sink on IC5004 is -15V. Do not allow heat sink
to touch GND or any other components.
Heat sink on Q8018 VpK=250V, is -15V. Do not touch or
short to GND or any other components.
Heat sink on Q8018 VpK=250V, is -15V. Do not touch or
short to GND or any other components.
CAUTION! - Pay attention to Neck Assembly WY Board wire
harness to B Board. The WY Board can easily break if there
is sudden or excessive tension on the harness.
is sudden or excessive tension on the harness.
1
Lift lever up on the right and left sides of the chassis bracket
and gently pull the chassis assembly away from the bezel.
2
Pull up and rotate both the A and D Boards in order to
service the unit.
1
Lift lever up on the right and left sides of the chassis
bracket and gently pull the chassis assembly away from
the bezel.
the bezel.
4 Screws
+BVTP 4 x 16
TYPE2 IT-3
4 Screws
+BVTP 4 x 16
TYPE2 IT-3
4 Screws
+BVTP 4 x 16
TYPE2 IT-3
3 Screws
+BVTP 4 x 16
TYPE2 IT-3
2 Screws
+BVTP 4 x 16 TYPE2 IT-3
Click on the first or last page to see other KD-34XBR970 service manuals if exist.