Read Sony KD-32DX150U Service Manual online
- 14 -
g
q p
1
2
3
4
5
6
7
8
9
0
VCR
DVD
TV
Using the remote control with VCR and DVD players
This remote control has been configured to operate not only Sony DVDs and VCRs but also those made by other manufacturers. To
operate other makes of DVD and VCR using this remote control, complete the following procedure:
operate other makes of DVD and VCR using this remote control, complete the following procedure:
1.
Find the 3 digit code for your brand from the list below. If your brand has more than one code
allocated to it, make a note of the first code only at this stage.
allocated to it, make a note of the first code only at this stage.
2.
Press the Media Selector button on the remote control until either the VCR green light or the
DVD green light illuminates.
DVD green light illuminates.
3.
With the required green light illuminated, press and hold down the YELLOW button for
approximately 6 seconds, until the light starts to flash.
approximately 6 seconds, until the light starts to flash.
4.
Using the numbered buttons, enter the 3 digit code for your DVD or VCR. Once a correct
number has been entered, all three green lights will illuminate momentarily.
number has been entered, all three green lights will illuminate momentarily.
5.
Turn on your DVD or VCR and check that the remote control operates the main functions. If not,
repeat steps 2 - 4 and enter the next 3 digit code allocated to your brand of VCR or DVD.
repeat steps 2 - 4 and enter the next 3 digit code allocated to your brand of VCR or DVD.
6.
When you wish to use the remote control to operate the TV again, press the Media Selector
button until the TV green light illuminates. Don’t forget to select VCR or DVD using the Media
Selector button every time you wish to operate that equipment with this remote control.
button until the TV green light illuminates. Don’t forget to select VCR or DVD using the Media
Selector button every time you wish to operate that equipment with this remote control.
Note:
The brand codes you set may be lost if weak batteries are not replaced immediately. Should this happen, use the
above procedure to reset the code. A small label has been attached to the inside of the battery cover for you to make
a note of your brand codes. Not all brands and models of DVDs or VCRs are covered in this list. However, Sony will
endeavour to update the software periodically, so please refer to the code table provided with your remote control.
The brand codes you set may be lost if weak batteries are not replaced immediately. Should this happen, use the
above procedure to reset the code. A small label has been attached to the inside of the battery cover for you to make
a note of your brand codes. Not all brands and models of DVDs or VCRs are covered in this list. However, Sony will
endeavour to update the software periodically, so please refer to the code table provided with your remote control.
VCR Brand List
DVD Brand List
Brand Code
Brand
Code
SONY (VHS)
301, 302, 303, 309
SONY
001
SONY (BETA)
301, 302, 303, 309
AIWA
021
SONY (DVD)
304, 305, 306
DENON
018, 027, 020, 002
AIWA
325, 331, 351
GRUNDIG
009, 028, 023, 024, 016. 003
AKAI
326, 329, 330
HITACHI
025, 026, 015, 004
DAEWOO
342, 343
JVC
006, 017
GRUNDIG
358, 355, 360, 361, 320, 351
KENWOOD
008
HITACHI
327, 333, 334
LG
015, 014
JVC
314, 315, 322, 344, 352, 353,
LOEWE
009, 028, 023, 024, 016. 003
LG
332, 338
MATSUI
013, 016
LOEWE
358, 355, 360, 361, 320, 351
ONKYO
022
MATSUI
356, 357
PANASONIC
018, 027, 020, 002
ORION
328
PHILIPS
009, 028, 023, 024, 016. 003
PANASONIC
321, 323
PIONEER
004
PHILIPS
311, 312, 313, 316, 317, 318,
SAMSUNG
011, 014
SAMSUNG
339, 340, 341, 345
SANYO
007
SANYO
335, 336
SHARP
019, 027
SHARP
324
THOMSON
012
THOMSON
319, 350
TOSHIBA
003
TOSHIBA
337
YAMAHA
018, 027, 020, 002
Specifications
TV System
I/DVB-T
Colour System
PAL
NTSC 3.58, 4.43 (only Video In)
MPEG-2 MP@ML
NTSC 3.58, 4.43 (only Video In)
MPEG-2 MP@ML
Channel Coverage
UHF:
B21 - B69
Picture Tube
FD Trinitron Approx. 82cm
Sound Output
Left/Right:
2x20W (music power), 2x10W (RMS)
Subwoofer
1x30W (music power), 1x15W (RMS)
Power Consumption
154W (1w standby)
Dimensions (w x h x d)
Approx. 887 x 620 x 600mm
Weight
Approx. 65kg
Rear Terminals
21-pin Euro connector (CENELEC standard) including audio/video
input, RGB input, TV audio/video output.
21-pin Euro connector (CENELEC standard) including audio/video
input, RGB input, TV audio/video output
input, RGB input, TV audio/video output
21-pin Euro connector (CENELEC standard) including audio/video
input, S-video input, selectable audio/video output.
input, S-video input, selectable audio/video output.
Conditional Access Module
RF In
Audio output - RCA phono jacks
Front Terminals
Video input - phono jack
S video input - 4 pin DIN
Audio inputs - phono jacks
Headphones jack - minijack stereo
Accessories Supplied
RM-933 remote control (1)
IEC designated size AA battery (2)
RF Loopthrough cable
IEC designated size AA battery (2)
RF Loopthrough cable
1
2
3/
s
3
4
s
4
4
Design and specification are subject to change without notice.
Click on the first or last page to see other KD-32DX150U service manuals if exist.