Read Sony KD-30XS955 Service Manual online
13
KD-30XS955/34XBR960/34XS955/36XS955
KD-30XS955/34XBR960/34XS955/36XS955
CABLE WIRE DRESSING
DY-SHIELD (ALL MODELS)
DY
Rotation
COIL
COIL
Rev. 1
6/21/04
6/21/04
DGC Restraint Cable
9mm purselock
attached to
Rotation Coil
ABOVE DY CLIP.
attached to
Rotation Coil
ABOVE DY CLIP.
9mm purselock
Attach to Rotation
Coil ABOVE DY CLIP
Attach to Rotation
Coil ABOVE DY CLIP
Keep DY leads
away from B-Bd
(Noise Problems)
away from B-Bd
(Noise Problems)
NOTE which hole DY
leads are dressed in!
leads are dressed in!
ADHESIVE STRIPS
Place OVER ECG.
ECG MUST touch CRT in
this area!
E.C.G.
E.C.G. Leads
DGC purselock
to hold DY Leads.
to hold DY Leads.
DY
Rotation
COIL
COIL
Cable Tie
To CN504/505
on A-Board
LCC
Coil
(Top)
LCC
Coil
(Top)
Rev. 1
6/28/04
6/28/04
Cable Tie
CN5805
[ DL ]
LCC
Coil
(Bottom)
LCC
Coil
(Bottom)
NOTE: MAKE SURE Cable Tie is
positioned so it does NOT
touch LCC COIL Wires! DO
NOT apply Cable Tie over
white/black LCC Tape!
positioned so it does NOT
touch LCC COIL Wires! DO
NOT apply Cable Tie over
white/black LCC Tape!
NOTE: MAKE SURE wires are
not too tight! Leave some
Slack!
not too tight! Leave some
Slack!
!
!
!
Dress DGC
leads through
leads through
Cable Ties!
DCG/LCC CAUTION POINTS (ALL MODELS)
NOTE: IF THE WIRE
DRESSING IS NOT
DONE PROPERLY,
IT MAY CAUSE
DISTORTION
DRESSING IS NOT
DONE PROPERLY,
IT MAY CAUSE
DISTORTION
Click on the first or last page to see other KD-30XS955 service manuals if exist.