Read Sony KD-30XS955 (serv.man2) Service Manual online
KD-30XS955/34XS955
13
KD-30XS955/34XS955
CABLE WIRE DRESSING
NOTE: IF THE WIRE DRESSING IS NOT DONE PROPERLY, IT MAY CAUSE DISTORTION
CHASSIS WIRE DRESSING DETAIL -1
CHASSIS WIRE DRESSING DETAIL -1
x3 11mm purselock (p/n: 3-703-983-02)
(NOTE positions of purselocks on main cable bundle.)
(NOTE positions of purselocks on main cable bundle.)
CRITICAL POINT:
Main cable bundle MUST be dressed as LOW
as possible between cement resistor and heat sink.
Wires cannot touch heat sink (sharp edges) or the
cement resistor (very hot).
Main cable bundle MUST be dressed as LOW
as possible between cement resistor and heat sink.
Wires cannot touch heat sink (sharp edges) or the
cement resistor (very hot).
CHASSIS WIRE DRESSING DETAIL -2
1-900-805-24 ground wire attached here
on Antenna Switch
on Antenna Switch
Pin Plug Cable 1-534-630-23
conect like this
conect like this
Add gasket nect to connection with
W-box (avoid cable touching shield case)
W-box (avoid cable touching shield case)
Click on the first or last page to see other KD-30XS955 (serv.man2) service manuals if exist.