KD-28DX51E - Sony TV Service Manual (repair manual). Page 18

Read Sony KD-28DX51E Service Manual online

- 18 -
REMOV
AL
 AND REPLACEMENT OF THE MAIN
-
BRACKET
BOTT
OM PLA
TES.
(1)  REMOVING THE PLA
TES
In the event of servicing being required to the solder side of the 
A
 Board printed wiring board, the
bottom plates fitted to the main chassis bracket require to be removed.
This is performed by cutting the gates with a sharp wire cutter at the locations indicated by the
arrows.
Note :
There are 2 plates fitted to the main bracket.
Only remove the necessary plate to gain access to the printed wiring board.
(2)  REFITTING THE PLA
TES
Because the plates differ in size it is important that the correct plates are refitted in their original
location.
Please note that the plates need to be rotated 180 degrees from their cut position to allow the tabs to
be fitted into their catch positions.
For safety reasons, on no account should the plates be re-
moved and not refitted after servicing.
Ta
b
Catch
Page of 68
Display

Click on the first or last page to see other KD-28DX51E service manuals if exist.