Read Sony KD-28DX40U Service Manual online
- 14 -
Position the chassis as indicated to access the solder side
of the PWB’s. To gain access to the A Board follow the
instructions on page 16. [Removal and Replacement of the
main bracket bottom plates ].
of the PWB’s. To gain access to the A Board follow the
instructions on page 16. [Removal and Replacement of the
main bracket bottom plates ].
Remove the shield case by pulling vertically until it is clear of the N Board. Release the N board socket retaining clips, circled, by
gently prising them with a screwdriver and carefully lift the N Board vertically.
gently prising them with a screwdriver and carefully lift the N Board vertically.
2-6. N Board Removal
2-4. Service Position
Release the clip circled and pull the F6 bracket towards the
rear of the set. The bracket can then be removed to allow
access to the boards.
To remove the F6 and H8 Boards release the clips circled and
ease the boards gently away from the support bracket.
rear of the set. The bracket can then be removed to allow
access to the boards.
To remove the F6 and H8 Boards release the clips circled and
ease the boards gently away from the support bracket.
Clip
Clips
Clips
Shield
case
case
2-5. F6 and H8 Board Removal
Click on the first or last page to see other KD-28DX40U service manuals if exist.