Read Sony FDL-PT22 / FDL-PT22JE Service Manual online
– 10 –
3-3. B BOARD ADJUSTMENT
- B BOARD - (COMPONENT SIDE)
RV402
RV301
GRADATION ADJUSTMENT
(1) Input a 10-step staircase signal from the test signal generator.
(2) Connect an oscilloscope probe between JL83 (G) and JL67 (D.
GND) and observe the waveform.
(3) The contrast should change when RV402 is turned.
(4) Connect the oscilloscope prove between JL84 (AUTO CB) and
JL67 (D. GND), and observe the waveform. Adjust RV402 so
that voltage A is 2.2
±
0.2V
(5) Check that the waveform between JL84 and JL67 is as shown
in Fig.3-4.
(6) Check to see that the phases C and D are within the range speci-
fied (
↔
).
JL83
JL84
0 IRE
100 IRE
C
D
A = 2.2
±
0.2V
Picture contrast
is varies.
is varies.
Fig.3-4
HUE ADJUSTMENT
(1) Receive a color bar.
(2) Insert an oscilloscope between JL81 (B) and JL67 (D.GND).
(3) Arrange RV301 as shown in Fig.3-5.
Fig.3-5
Click on the first or last page to see other FDL-PT22 / FDL-PT22JE service manuals if exist.