Read Sony VPL-VW100 Service Manual online
1
VPL-VW100
EVEN Parity ...... Total number of “1”s from D0 to D7 is an even number.
8 0
...... Total number of “1”s from D0 to D7 is an odd number.
8 1
D4
D5
D6
D7
(MSB)
(LSB)
(EVEN)
BIT
PARITY STOP
BIT
START
D3
D2
D1
D0
1. Introduction
This protocol manual describes the basic configuration and basic operations of various commands used
for projector. Projector can be controlled using the commands provided in “Appendix”. Using an external
CONTROLLER , etc., inputs can be switched and the power can also be turned on and off. In the follow-
ing paragraphs, “CONTROLLER” means an external device such as a PC which controls projector using
these commands.
for projector. Projector can be controlled using the commands provided in “Appendix”. Using an external
CONTROLLER , etc., inputs can be switched and the power can also be turned on and off. In the follow-
ing paragraphs, “CONTROLLER” means an external device such as a PC which controls projector using
these commands.
2. RS-232C
2-1. Communication Specifications
<RS-232C Communication Signal>
. Full duplex communication channels (Flow control not performed.)
. Start-stop synchronism system
. Baud rate: 38.4 kbps (bits per second)
. The bit configuration is defined as follows.
. Start-stop synchronism system
. Baud rate: 38.4 kbps (bits per second)
. The bit configuration is defined as follows.
1 START Bit
+ 8 DATA Bits + 1 PARITY Bit + 1 STOP Bit
Click on the first or last page to see other VPL-VW100 service manuals if exist.