Read Sony VPL-AW10 / VPL-AW15 Service Manual online
VIDEO PROJECTOR
VPL-AW10
VPL-AW15
REMOTE COMMANDER
RM-PJAW10
RM-PJAW15
SERVICE MANUAL
1st Edition (Revised 1)
1st Edition (Revised 1)
VPL-AW10/AW15
! WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
! WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
! AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE RULE IN REGION.
DISPOSE OF USED BATTERIES ACCORDING TO THE RULE IN REGION.
1
VPL-AW10/AW15
Table of Contents
1.
Service Information
1-1.
Appearance Figure .......................................................... 1-1
1-2.
Board Locations .............................................................. 1-1
1-3.
Disassembly .................................................................... 1-2
1-3-1.
Top Cover Assembly and H Board ....................... 1-4
1-3-2.
C Board-1 .............................................................. 1-5
1-3-3.
C Board-2 .............................................................. 1-6
1-3-4.
OPT Unit Section and TA Board .......................... 1-7
1-3-5.
OPT Unit Assembly .............................................. 1-7
1-3-6.
In-Polarizer Panel Assembly ................................. 1-8
1-3-7.
Iris Unit, and PS Assembly ................................... 1-8
1-3-8.
Lamp Power Supply Section ................................. 1-9
1-3-9.
TL Board and Fuse Connector Assembly ........... 1-10
1-3-10.
Lamp Power Supply-1 ......................................... 1-10
1-3-11.
Lamp Power Supply-2 ......................................... 1-11
1-3-12.
DC Fan (Sirocco) ................................................ 1-12
1-3-13.
DC Fan (80), and NF Board ................................ 1-12
1-3-14.
G Board ............................................................... 1-13
1-3-15.
DC Fan (92) ......................................................... 1-14
1-3-16.
UV Board and DC Motor .................................... 1-15
1-3-17.
GS Board ............................................................. 1-16
1-3-18.
F Board ................................................................ 1-17
1-3-19.
Extension Boards and Extension Cables ............. 1-18
1-3-20.
Removing the C Board ........................................ 1-18
1-3-21.
C Board Extension Connentions ......................... 1-19
1-4.
Unleaded Solder ............................................................ 1-20
1-5.
Service Know-How ...................................................... 1-20
1-5-1.
When the Optical Unit ASSY is Replaced .......... 1-20
1-5-2.
When the Board is Replaced ............................... 1-20
1-5-3.
IRIS Copy ............................................................ 1-20
1-5-4.
W/B Copy ............................................................ 1-20
1-6.
Upgrading the Software ................................................ 1-21
1-7.
Memory ......................................................................... 1-22
1-8.
Warning on Power Connection ..................................... 1-24
2.
Electrical Adjustments
2-1.
Preparations .................................................................... 2-1
2-1-1.
Required Equipment .............................................. 2-1
2-1-2.
Service Mode Setting ............................................ 2-1
2-1-3.
Model Name Display (Shop Demonstration)
Mode Setting ......................................................... 2-1
2-2.
Adjustment Item Initialize Data ...................................... 2-2
2-3.
V COM Adjustment ........................................................ 2-6
2-4.
IRIS Adjustment ............................................................. 2-6
2-5.
White Balance Adjustment on Servicing ........................ 2-6
2-5-1.
Component ............................................................ 2-6
2-5-2.
Computer ............................................................... 2-7
3.
Semiconductor Pin Assignments
4.
Spare Parts
4-1.
Notes on Repair Parts ..................................................... 4-1
4-2.
Exploded Views .............................................................. 4-2
4-3.
Electrical Parts List ....................................................... 4-12
5.
Block Diagrams
Overall ............................................................................ 5-1
C (1/4) ............................................................................. 5-2
C (2/4) ............................................................................. 5-3
C (3/4), H, NF, Q, TA, TL, UV ...................................... 5-4
C (4/4) ............................................................................. 5-5
F, G, GS .......................................................................... 5-6
6.
Diagrams
6-1.
Frame Schematic Diagrams ............................................ 6-2
Frame Wiring .................................................................. 6-2
6-2.
Schematic Diagrams and Printed Wiring Boards ........... 6-3
Schematic Diagrams
C (1/13) ........................................................................... 6-3
C (2/13) ........................................................................... 6-4
C (3/13) ........................................................................... 6-5
C (4/13) ........................................................................... 6-6
C (5/13) ........................................................................... 6-7
C (6/13) ........................................................................... 6-8
C (7/13) ........................................................................... 6-9
C (8/13) ......................................................................... 6-10
C (9/13) ......................................................................... 6-11
2
VPL-AW10/AW15
C (10/13) ....................................................................... 6-12
C (11/13) ....................................................................... 6-13
C (12/13) ....................................................................... 6-14
C (13/13) ....................................................................... 6-15
F .................................................................................... 6-18
GS ................................................................................. 6-19
G (1/2) ........................................................................... 6-20
G (2/2) ........................................................................... 6-21
H ................................................................................... 6-24
NF ................................................................................. 6-25
Q ................................................................................... 6-25
TA ................................................................................. 6-26
TL ................................................................................. 6-26
UV ................................................................................. 6-27
Printed Wiring Boards
C .................................................................................... 6-16
F .................................................................................... 6-18
GS ................................................................................. 6-19
G ................................................................................... 6-22
H ................................................................................... 6-24
NF ................................................................................. 6-25
Q ................................................................................... 6-25
TA ................................................................................. 6-26
TL ................................................................................. 6-26
UV ................................................................................. 6-27
