Read Sony RM-PJVW60 / VPL-VW60 Service Manual online
1-6
VPL-VW60
1-3-5. Optics Block
Press and
disconnect
the connector.
disconnect
the connector.
C board
CN1000
CN1000
Flat connector assembly
Wire holder
(M3)
(M3)
GA board
GB board
C board
3 Disconnect the connectors
from each board.
from each board.
CN303
CN701
CN1000
CN302
CN800
CN1003
CN1003
CN1002
Fan connector
Flat connector
assembly B
assembly B
Front Side
of Unit
of Unit
F holder
GA board
C board
GB board
1 Harnesses
2
F holder
Wire holder (M3)
6 Two screws
(+PSW 3
(+PSW 3
x 8)
7 House cover
9 Fuse connector
assembly
assembly
8 Lamp power supply
connector assembly
connector assembly
4 Screw
(+PSW 3
(+PSW 3
x 8)
5 Lamp fan duct
0 Four screws
(+BVTP 4
(+BVTP 4
x 16)
!= Optics block
!- Screw
(+PSW 3
(+PSW 3
x 8)
Be careful not to break each
flat connector assembly.
flat connector assembly.
G sheet
GA shield
Flat connector assembly A
Plastic tape
(UL tape, length ; 40mm)
(UL tape, length ; 40mm)
Note:
Keep the flat connector assembly
toward the GA board and place
the plastic tape (UL tape) on it, in
order to hold the flat connector
assembly tight on GA shield.
Keep the flat connector assembly
toward the GA board and place
the plastic tape (UL tape) on it, in
order to hold the flat connector
assembly tight on GA shield.
Click on the first or last page to see other RM-PJVW60 / VPL-VW60 service manuals if exist.