Read Sony RM-PJVW60 / VPL-VW40 Service Manual online
1-11
VPL-VW40
1-3-11. GA Board and GB Board-1
GA board
GB board
GB board
GB board
2 Disconnect the connectors from each board.
CN800
CN702
CN301
CN600
CN600
CN601
CN601
CN700
CN701
4 Four screws
(+BVTP 3
(+BVTP 3
x 12)
3 Screw
(+PSW 3
(+PSW 3
x 8)
1
F holder
CN303
CN302
GA board
F holder
G sheet
Be careful not to break each flat
connector assembly.
connector assembly.
CN700
Flat connector
assembly B
assembly B
Flat connector
assembly B
assembly B
Flat connector
assembly A
assembly A
Flat connector
assembly
assembly
Front Side
of Unit
of Unit
6 Remove the GA/GB boards section
in the direction of the arrow.
in the direction of the arrow.
5
Press down the G sheet, and
disengage the hooks of the
G sheet from the two slits of the
GB shield.
G sheet from the two slits of the
GB shield.
G sheet
Two claws
of the G sheet
of the G sheet
Two slits of the GB sheet
Plastic tape
(UL tape, length ; 40mm)
(UL tape, length ; 40mm)
Plastic tape
(UL tape)
(UL tape)
GA shield
Flat connector assembly A
Flat connector
assembly A
assembly A
Note:
Keep the flat connector assembly toward the
GA board and place the plastic tape (UL tape)
on it, in order to hold the flat connector assembly
tight on GA shield.
Keep the flat connector assembly toward the
GA board and place the plastic tape (UL tape)
on it, in order to hold the flat connector assembly
tight on GA shield.
Click on the first or last page to see other RM-PJVW60 / VPL-VW40 service manuals if exist.