Read Sony RM-PJVW10 / VPL-VW12HT Service Manual online
VPL-VW12HT
1-8
1-13. Power Cord
Use a proper power cord for your local power supply.
The United States,
Continental
UK, Ireland,
Japan
Canada
Europe
Australia, New Zealand
Plug type
VM0233
290B
YP-12A
COX-07
—
1)
YP332
Female end
VM0089
386A
YC-13B
COX-02
VM0310B
YC-13
Cord type
SJT
SJT
H05VV-F
H05VV-F
N13237/CO-228
VCTF
Rated Voltage & Current 10A/125V
10A/125V
10A/250V
10A/250V
10A/250V
7A/125V
Safety approval
UL/CSA
UL/CSA
VDE
VDE
VDE
DENAN
1) Use the correct Plug for your country.
1-14. Software Writing Procedure
* : Windows is a registered trademark of Microsoft Corporation.
When the following IC is replaced, the writing job should be performed as described below.
Target ICs :
Main CPU (IC5005)
Scanning ROM (IC5208)
Scanning ROM (IC5208)
(1) Writing the Main CPU
This section describes how to use this Windows application for upgrading software of main CPU (H8S/
2633). Jig and application software are available from Hitachi dealer all over the world.
Adaptor board : HS0008EASF4H
Adaptor board : HS0008EASF4H
Windows interface software : HS6400FWIW4SF
1. Setup before starting the writing
Following setup is required before starting the writing.
1) Open the cabinet of the adaptor board of the jig.
2) Connect pin-2 and pin-3 with a jumper JP1.
2) Connect pin-2 and pin-3 with a jumper JP1.
3) Set switches as shown below.
S3-1 : 1
S4-1 : E
S3-2 : 1
S4-2 : E
S3-3 : 0
S4-3 : E
S3-4 : 1
S4-4 : D
S3-5 : 1
S4-5 : D
S3-6 : 1
S4-6 : D
S3-7 : 1
S4-7 : E
S3-8 : 1
S4-8 : E
4) Set Power switch as OFF (0).
Click on the first or last page to see other RM-PJVW10 / VPL-VW12HT service manuals if exist.