Read Sony RM-PJ2 / RM-PJM12 / VPL-CS5A / VPL-CS6 / VPL-CX6 / VPL-EX1 Service Manual online
1-7
VPL-CS5A/CS6/CX6/EX1
1-3-10. Opt Unit Assy and Lamp Assy Removal
To remove the opt unit assy and lamp assy, remove C board and the DC fan beforehand.
4
Four screws
(+P M4x12)
5
Opt unit assy
1
Two screws
(+PWHTP 3
x
10)
6
Lamp house,
Lamp top cover
2
Connector
(Lamp)
7
Lamp assy
3
Two screws
(
+
B 3
x
6)
Opt unit assy
Note : Do not disassemble the opt unit unless
specified by the above views.
!-
S In-polarizer (B)
assy
assy
4
Lens-1 fly eye
Note when installing:
(For the VPL-EX1, the protruded portion
should be installed in the Lens-2 fly eye side.)
(For the VPL-CS6/CX6/CS5A, the protruded portion
should be installed in the UV-cut pre-filter side.)
Note when installing:
(For the VPL-EX1, the protruded portion
should be installed in the Lens-2 fly eye side.)
(For the VPL-CS6/CX6/CS5A, the protruded portion
should be installed in the UV-cut pre-filter side.)
5
P/S assy
0
S In-polarizer (R)
assy
assy
9
S In-polarizer (G)
assy
assy
6
PS con aperture
(VPL-EX1)
7
Lens-2 fly eye
3
UV-cut pre-filter
2
Unit cover (B), Six cushions
Opt unit assy
1
Two screws
(
+
B 2
x
6)
8
Three screws
(
+
B 2
x
6)
1-3-11. PS Con Aperture (VPL-EX1) and S In-polarizer (R), (G), (B) Removal
Click on the first or last page to see other RM-PJ2 / RM-PJM12 / VPL-CS5A / VPL-CS6 / VPL-CX6 / VPL-EX1 service manuals if exist.