Read Sony DPP-SV88 Service Manual online
3-8
DPP-SV88 V1
Fig.3-11
Procedure
1.
Enter the service mode, move the
\ mark to “YC out level” using Direction keys, and press the
Enter key. (Fig. 3-11)
2.
A color-bar signal is displayed on the monitor.
3.
Adjust using Direction keys (
↑
,
↓
,
←
, and
→
) so that the video output level (SYNC to 100%
white) and burst level satisfy the specifications.
Video output level (Use
↑
and
↓
keys.)
Specifications: 1
±
0.02 V p-p
n
↑
key: Increases the level.
↓
key: Decreases the level.
Burst level (Use
←
and
→
keys.)
Specifications: 225
±
15 mV p-p (J and UC)
235
±
15 mV p-p (CED and CEK)
n
→
key: Increases the level.
←
key: Decreases the level.
4.
Confirm that the video output level and burst level satisfy the specifications and press the Enter key.
5.
When the monitor screen returns to the screen shown in Fig. 3-11, turn off the power and disconnect
the power cord from this unit.
Click on the first or last page to see other DPP-SV88 service manuals if exist.