DPP-SV77 - Sony Other Service Manuals Service Manual (repair manual). Page 14

1-9

DPP-SV77 V1

16 

1

To the wall
outlet

AC power cord
(supplied)

Windows/Macintosh
computer*

To USB connector

To USB connector

After you make the connections, connect the supplied AC power cord to the
AC IN connector of the printer and then to an AC outlet.
The POWER indicator lights in red.

Connect the USB connectors of the printer and your computer (Windows PC
or Macintosh) with a commercially available USB cable.  By installing the
supplied driver software on your computer, you can print an image from your
computer’s hard disk.   With the “Memory Stick/PC Card Reader Software,”
you can also transfer images from a “Memory Stick” or PC card to your
computer’s hard disk.
For details on how to install and operate the software, see “Printing from your
computer” (pages 67–84).

The Reader software supports Windows only.

17 

Setting up

The PC input indicator lights and the printer enters the PC mode.

•Use a USB cable 3 m or shorter in length.
•Without connecting a computer that is already powered on to the USB connector,

you cannot switch to the PC mode manually by touching [INPUT SELECT].

•When you connect your printer to a television, no pictures are displayed on the

television in the PC mode.  This is not due to trouble with the printer.

•Refer to the instruction manual of your computer for further information.
•You cannot use the printer and the printer driver on a network or with a

commercially available printer buffer.

If your USB cable is not equipped with a clamp filter, attach the supplied clamp filter
near the printer’s USB connector of the cable .

To attach the clam filter,  release the lock of the clamp filter with a screwdriver or a
similar tool, contain the cable, and lock the filter in place as illustrated below.  Please
attach the filter as nearest the printer’s USB connector as possible.