Read Sony DPP-FP75 Service Manual online
3-1
DPP-FP75
3-1. ADJUSTMENT WHEN MAIN MOUNT ASSY
OR MECHANISM EXCHANGED
When the mechanism exchange or MAIN MOUNT ASSY is exchanged,
the following adjustment is needed.
1.
Procedure of the HD voltage adjustment
Note:
Download the file for the head adjustment from the ESI homepage.
1.
It does with a top cover removed after mechanism or MAIN
MOUNT ASSY are exchanged. At this time, please confirm the
HD voltage
adjustment value pasted to mechanism.
2.
Connect the AC adaptor with the printer and push the power
button.
Note
: Do not insert the memory card in the card slot of the printer.
Moreover, do not insert it in any terminal USB.
3.
Insert the USB memory that the file for the head adjustment en-
ters in the “PictBridge/EXT INTERFACE” terminal of the printer.
confirm that the fan of the printer rotates.
Note
: Make the MISC folder for the most significant hierarchy of the
USB memory, and copy the file (The file name: SONYADJHD.MRK)
for the head adjustment.
Power supply switch: SW1
HD voltage adjustment volume: VR1
HD voltage adjustment value
HD voltage measurement pad (-): TP135
HD voltage measurement pad (+): TP134
USB memory
(The "SONYADJHD.MKR" file has been
written in the "
(The "SONYADJHD.MKR" file has been
written in the "
MISC
" folder. )
3. ADJUSTMENT AND SETTING
4.
Connect the circuit tester with the HD voltage measure-
ment pad, turn the HD voltage adjustment volume, and
match it to the HD voltage adjustment value.
Note
: Adjust to become a figure that has been described to the
label pasted to mechanism.
The adjustable range is description figure
±
0.01V.
Pull out the power supply code, and make it to power
supply OFF when the HD adjustment of voltage is com-
pleted.
5.
Confirm the function (LCD button) and externals ap-
plying a top cover.
6.
Confirm the printing.
The paper tray that the ribbon and the print paper enter
is pushed, and connect the AC adaptor and push the
power button.
Insert the USB memory that the file for the head adjust-
ment enters in the “PictBridge/EXT INTERFACE” ter-
minal of the printer.
The print starts automatically.
Confirm the printing result when the print ends.
* When the printing result is abnormal.
Insert the USB memory that the file for the head adjust-
ment enters in the “PictBridge/EXT INTERFACE” ter-
minal of the printer and print automatically. Print with a
normal printer in a similar way and compare the print-
ing results.
[ Connection and adjustment points ]
HD voltage adjustment Setting according to destination
Mechanism exchange
Yes
No
MAIN MOUNT ASSY
Yes
Yes
exchange
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
Ver. 1.2 2009.08
Click on the first or last page to see other DPP-FP75 service manuals if exist.