DPP-FP30 - Sony Other Service Manuals Service Manual (repair manual)

dpp-fp30 service manual
Model
DPP-FP30
Pages
7
Size
254.98 KB
Type
PDF
Document
Service Manual
Brand
Device
Other Service Manuals
File
dpp-fp30.pdf
Date

Read Sony DPP-FP30 Service Manual online

SERVICE MANUAL
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Ver. 1.3  2006.09
SPECIFICATIONS
DPP-FP30
Supplied accessories
Paper tray (1)
CD-ROM (1)
AC  power adaptor (1)
AC  power cord (1)
Color print pack (1)
Operating Instructions (1)
Warranty (1)
Sony End User Software License Agreement (1)
AC power adaptor
Power requirements
AC  100 to 240 V, 50/60 Hz, 1.5 to 0.75 A
Rated output voltage
DC 24 V, 2.2 A
Operating temperature
5 ˚C to 35 ˚C (41 ˚F  to 95 ˚F )
Dimensions
Approx. 60 x 30.5 x 122 mm
(2 3/8 x 1 1/4 x 4 7/8 inches)
(w/h/d, excluding protruding parts)
Mass
Approx. 305 g (11 oz)
Design and specifications are subject to change without notice.
*1: In some regions, 3.5 x 5 inch size print paper is not sold.
*2: Some special file types are not compatible.
*3: “DCF” stands for Design rule for Camera File system.
*4: “Exif” is an image file format containing an image data added with
its thumbnail data for viewing, shot date data and the shooting
conditions data.
Printer
Printing method
Dye sublimation printing (Yellow/Magenta/Cyan 3 pass)
Resolution
300 dpi x 300 dpi
Image processing per dot
256 levels (8 bits for each Yellow/Magenta/Cyan),
approx. 16 770 000 colors
Printing size
Post Card (4 x 6 inch) size:
101.6 x 152.4 mm
(maximum,borderless)
3.5 x 5 inch size*1:
89 x 127 mm
(maximum, borderless)
Printing time (per sheet)
Post Card (4 x 6 inch) size:
approx. 90 seconds
3.5 x 5 inch size*1:
approx. 80 seconds
(excluding the time for data processing and data
transferring from the computer or digital camera.)
Input/Output connectors
USB connector (1)
PictBridge connector (1)
Compatible image file formats*2
JPEG: DCF*3 2.0 compatible, Exif*4 2.21 compatible
Maximum number of pixels to behandled
JPEG: 10 000 (H) x 7 500 (V) dots
Power requirements
DC IN jack, DC 24V
(On standby mode, less than 1W)
Operating temperature
5 ˚C to 35 ˚C (41 ˚F to 95 ˚F )
Dimensions
Approx. 175 x 60.5 x 137 mm
(7 x 2 1/2 x 5 1/2 inches)
(w/h/d, excluding protruding parts)
(400 mm (15 3/4 inches) of depth when the paper tray
is installed.)
Mass
Approx. 950g (2 lb 2 oz)
(excluding the 100 g (4 oz) paper tray)
Sony EMCS Co.
2006I0500-1
  © 2006.9
Published by Kohda TEC
9-879-278-02
DIGITAL PHOTO PRINTER
2
!
 WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
!
 WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
!
 AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
3
Table of Contents
1. Service Overview
1-1.
About the Spare Parts ..................................................................................... 4
1-2.
Unleaded Solder ............................................................................................. 4
2. Spare Parts
2-1.
Notes on Repair Parts ..................................................................................... 5
2-2.
Exploded Views ............................................................................................. 6
2-3.
Packing Materials & Supplied Accessories ................................................... 7
4
1-2. Unleaded Solder
Boards requiring use of unleaded solder are printed with a
lead free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come
printed with the lead free mark due to their particular size.)
 : LEAD FREE MARK
m
. Be sure to use the unleaded solder for the printed circuit
board printed with the lead free mark.
. The unleaded solder melts at a temperature about 40 dC
higher than the ordinary solder, therefore, it is recom-
mended to use the soldering iron having a  temperature
regulator.
. The ordinary soldering iron can be used but the iron tip
has to be applied to the solder joint for a slightly longer
time. The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful.
1-1. About the Spare Parts
When the parts other than those described in “Section 2
Spare Parts” need replacement, replace the unit (DPP-
FP30).
Section 1
Service Overview
Page of 7
Display

Download Sony DPP-FP30 Service Manual (Repair Manual)

Here you can read online and download Sony DPP-FP30 Service Manual in PDF. DPP-FP30 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DPP-FP30 Other Service Manuals. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.