DPP-F700 - Sony Other Service Manuals Service Manual (repair manual). Page 12

3-1

DPP-F700

Set the destination when the MAIN PWB ASSY SERVICE was
replaced.

1. Plug the AC adaptor attached to the set into the DC IN 24V

terminal on the rear panel of the set and insert the power cord
into the socket.

2. All of the LEDs on the operation panel light up for three to

five seconds.

3. After confirming that the LEDs have turned off, press the

[MENU] button, the [ENTER] button, and the [PRINT] but-
ton simultaneously.

4. The default settings screen (Fig. 3-1-1) is displayed.

5. Check that the model name displayed on the side of “Model”

name meets the following:
DPP-F700

6. Red characters of “Destination” show default setting of this

set.
(Fig. 3-1-1 shows that the destination has been set to U2)
Using [

V] [v] [b] [B] buttons, move a yellow frame to the

destination to be set. (Fig. 3-1-1 shows that J1 has been se-
lected as destination.)

7. Press the [ENTER] button, and the characters will change to

red, indicating that the selected destination was set. (Fig. 3-1-
2)

8. With a yellow frame moved to “Restore all setting”, press the

[ENTER] button. (Fig. 3-1-3)

9. The screen becomes yellow and the setting is complete.

10. With yellow screen displayed, unplug the AC adaptor from

the DC IN 24V terminal.

11. Plug the AC adaptor into the DC IN 24V terminal and turn on

the power.

12. Press the [MENU] button to display the Settings menu, and

select “Initialize” to execute. (Fig. 3-1-5)

After the destination has been changed, text on the
screen is displayed in the default language. “Initialize”
is the eighth item from the top in the Settings menu.