Read Sony DPP-EX5 Service Manual online
3-6
DPP-EX5 V1
12. The screen (Shown in Fig. 3-10) is displayed on the monitor screen.
n
At that time, confirm that the display below “Print Calibrate” is the determined numeric character
At that time, confirm that the display below “Print Calibrate” is the determined numeric character
(R3-5 in this example).
13. Print a density confirmation pattern (gray) again according to the method in steps 2 to 4.
Confirm that the print result is equal to the density of a test pattern as reference.
If fine adjustment is required, perform steps 7 and later again and increase or decrease the numeric
If fine adjustment is required, perform steps 7 and later again and increase or decrease the numeric
character in step 11.
m
To increase the density, increase the numeric character.
To decrease the density, decrease the numeric character.
m
To increase the density, increase the numeric character.
To decrease the density, decrease the numeric character.
14. Set the screen to the initial screen of the service mode, turn off the power, and disconnect the power
cord from the printer.
Fig.3-10
Click on the first or last page to see other DPP-EX5 service manuals if exist.