Read Sony DPF-D85 Service Manual online
DPF-D85
– 2 –
SPECIFICATIONS
x
Photo frame
LCD screen
LCD panel:
20cm/8.0-inch, TFT active matrix
Total number of dots:
1,152,000 (800 × 3(RGB) × 480) dots
Effective display area
Display aspect ratio: 16:10
LCD screen area:
18.8cm/7.4-inch
Total number of dots:
1,036,800 (720 × 3(RGB) × 480) dots
LCD backlight life
20,000 hours
(before brightness of the backlight is reduced
to half)
Input/Output connectors
USB connector (TypeB, Hi-Speed USB)
Slots
“Memory Stick PRO” (Standard/Duo) /
SD memory card / MMC /
SD memory card / MMC /
Compatible image file formats
JPEG: DCF 2.0 compatible, Exif 2.21
compatible, JFIF
*1
TIFF: Exif 2.21 compatible
BMP: 1, 4, 8, 16, 24, 32 bit Windows format
RAW (preview only
BMP: 1, 4, 8, 16, 24, 32 bit Windows format
RAW (preview only
*2
) : SRF, SR2, ARW
(2.0 or lower version)
(Some image file formats are not
compatible.)
Maximum number of pixels that can be
displayed
8,000 (H) × 6,000 (V) dots
*3
File system
FAT12/16/32,
sector size of 2,048 bytes or smaller
Image file name
DCF format, 128 characters within 5th
hierarchy
Maximum number of files that can be
handled
4,999 files for a memory card
Internal memory capacity
*4
256 MB
(Approx. 500 images
*5
can be saved.)
Power requirements
DC IN jack, DC 5V
Power consumption
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Model
in operation mode
AC adaptor
at the maximum load
6.6 W
normal mode*
6.4 W
* The definition of the normal mode is a status which
allows the performance of a slideshow using
images stored in the internal memory with the
default settings without inserting a memory card or
connecting an external device.
Dimensions
[With the stand spread out]
Approx. 240 × 160 × 123 mm
(9
1
/
2
× 6
3
/
8
× 4
7
/
8
inches)
(width/height/depth)
[When the photo frame is hanging on the
wall]:
wall]:
Approx. 240 × 160 × 39.3 mm
(9
1
/
2
× 6
3
/
8
× 1
9
/
16
inches)
(width/height/depth)
Mass
Approx. 580 g (20 oz)
(excluding the AC adaptor)
Included accessories
·Digital photo frame
·Stand
·Remote control
·AC adaptor
·Operating Instructions
·CD-ROM (Digital Photo Frame Handbook)
·Warranty
x
AC adaptor
Power requirements
-
100 V to 240 V, 50/60 Hz
0.3 A
Rated output voltage
5 V 2 A
Dimensions
Approx. 45 × 72 × 50 mm
(1
(1
13
/
16
× 2
7
/
8
× 2 inches)
(width/height/depth)
(excluding the protruding parts)
(excluding the protruding parts)
Mass
Approx. 110 g (4 oz)
See the label of AC adaptor for more details.
Design and specifications are subject to change
without notice.
*1
: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0 format
*2
: RAW files are displayed as thumbnail preview.
*3
: 17 bits or more are required both vertically and
horizontally. An image with an aspect ratio of 20:1 or
more may not be displayed properly. Even if the
aspect ratio is less than 20:1, display problem may
occur in thumbnails, slideshow or other occasions.
*4
: The capacity is calculated as 1 MB is equivalent to
1,000,000 bytes. The actual capacity is reduced as
files for management and applications are included.
Approximately 200 MB can be used for your actual
operation.
*5
: Approximate number is shown when the images
taken by 2,000,000 pixels equivalent camera are
saved. The value may vary depending on the shooting
condition.
including the
xD-Picture Card slot
DPF-D85
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY
SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES
SUPPLÉMENTS PUBLIÉS PAR SONY.
Unleaded solder
Boards requiring use of unleaded solder are printed with the leadfree
mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with the
lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than ordi-
nary solder.
Ordinary soldering irons can be used but the iron tip has to be applied
to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to about
350°C.
Caution: The printed pattern (copper foil) may peel away if the heated
tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such as
on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may also be
added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes and
bridges.
2. Check the interboard wiring to ensure that no wires are “pinched”
or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors,
that were installed during a previous repair. Point them out to the
customer and recommend their replacement.
4. Look for parts which, through functioning, show obvious signs of
deterioration. Point them out to the customer and recommend their
replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°C during
repairing.
• Do not touch the soldering iron on the same conductor of the circuit
board (within 3 times).
• Be careful not to apply force on the conductor when soldering or
unsoldering.
MAIN FEATURES
The Sony DPF-D85 is a digital photo frame for easily displaying images
taken with a digital camera or other device, without using a computer.
x
Support for various memory cards
Supports various memory cards, such as a “Memory Stick”, SD memory
card, and xD-Picture Card. Just insert a memory card removed from a
digital camera or other device, and you will be able to view the images
immediately.
x
Various display functions
You can enjoy various viewing modes, such as the slideshow display,
Clock and calendar display, Single view mode, and Index image display.
x
Various slideshow styles
The displayed image can be switched automatically as though you are
turning the pages of an album yourself. You can select from various
slideshow styles, including the ones displaying a clock or calendar. You
can also change playback settings such as the playback order.
x
Importing images to internal memory
You can import and save the images in the internal memory.
x
Exporting images
You can export images in the internal memory to your memory card.
x
Sorting function
You can sort images by the date, folder, image direction, and mark.
x
Automatic rotation of images
The photo frame automatically rotates images to their proper orienta-
tion. Images are also automatically rotated when the photo frame is set
in either the portrait or landscape position.
x
Displaying images on a wall
You can hang the photo frame on the wall.
Click on the first or last page to see other DPF-D85 service manuals if exist.