DPF-D72N - Sony Other Service Manuals Service Manual (repair manual). Page 5

DPF-D72N

Set the destination when the MAIN PWB ASSY SERVICE was
replaced.

1. Plug the AC adapter attached to the set into the DC IN 5V

terminal on the rear panel of the set and insert the power cord
into the socket.
Press the 1 (on/standby) button to turn off the power once.
(The power switch LED on the set changes from green to or-
ange.)

2. With the [VIEW MODE] button and [MENU] button pressed,

turn on the 1 (on/standby) button, and when the default set-
ting screen (Fig. 2-1-1) appears, release the [VIEW MODE]
button and [MENU] button.

3. Check that the model name displayed on the side of “Model”

name meets the following:
A3N: DPF-D72N (BLACK/RED/WHITE)
SWAROVSKI: DPF-D72N (CRYSTAL)

Using [

B] [b] buttons, move a yellow frame to the model

name to be set.

4. Red characters of “Destination” show default setting of this

set.
(Fig. 2-1-1 shows that the destination has been set to U2)
Using [

V] [v] [b] [B] buttons, move a yellow frame to the

destination to be set. (Fig. 2-1-1 shows that J1 has been se-
lected as destination.)

5. Press the [ENTER] button, and the characters will change to

red, indicating that the selected destination was set. (Fig. 2-1-
2)

6. With a yellow frame moved to “Restore all setting”, press the

[ENTER] button. (Fig. 2-1-3)

7. The screen becomes green and the setting is complete.

8. With green screen displayed, unplug the AC adapter from the

DC IN 5V terminal.

9. Plug the AC adapter into the DC IN 5V terminal and turn on

the power.

10. Press the [MENU] button to display the Settings menu, and

select “Initialize” to execute. (Fig. 2-1-5)