Read Sony DPF-D100 Service Manual online
DPF-D100
- 5 -
SECTION 2
INITIALIZATION OF DESTINATION
2-1. WRITING PROCEDURE
Execute the initialization of destination when exchange MAIN PWB
ASSY SERVICE.
ASSY SERVICE.
Prior preparation
1. Download DPFD80.zip from the ESI homepage and decompress
the zip file to obtain following five softwares.
Name of software
Contents
“ISP.vup”, ”LiteonTP.vup”
Software for DPF
“FUSB100.INF”, ”fusb100.sys”
DPF drive software for PC
“DPF-v70"
Rewriting tool software
2. Copy DPF software (“ISP.vup” and “LiteonTP.vup”) onto the
root directory of the memory card (Memory Stick or SD card).
3. Copy DPF drive software (“FUSB100.INF”, ”fusb100.sys”,
”DPF-v70.exe”) for PC onto an arbitrary directory of PC.
(OS:WinXP(SP2))
(OS:WinXP(SP2))
4. Prepare the USB cable for the PC connection.
Writing procedure
1. Insert the memory card of prior preparation 2 in this unit.
Turn on the power pushing [u] button while [VIEW MODE]
button pushing.
button pushing.
2. Screen becomes white about 20 seconds after the following
display appears.
Connect PC with USB cable if white screen is displayed.
(White screen doesn't change to the last minute. )
(White screen doesn't change to the last minute. )
3. Install the DPF drive software (“FUSB100.INF” and
“Fusb100.sys” file) in PC according to the message because
Windows OS demands Driver.
Windows OS demands Driver.
5. Make “Language”, “Date Format”, and “First Weekday” a set
selection that is appropriate for inducing referring to a set table
according to destination.
Begin to push the [Write Configurations] button, and to write
it.
according to destination.
Begin to push the [Write Configurations] button, and to write
it.
6. About two seconds later, [Write Configurations] button changed
to effective (The character of button is changed from the gray
to the black) and writing ends.
to the black) and writing ends.
7. Push the [Exit] button of the PC screen, and quit the application.
8. Execute a safe detaching with Windows OS, and remove the
8. Execute a safe detaching with Windows OS, and remove the
USB cable.
9. Pull out the memory card that does step 1, remove the AC adaptor
and power OFF.
10. Connect the AC adaptor and power ON. Then initialize the
setting from the menu.
Final reminder
1. Confirm the language and the putting calendar day display
become it according to the setting.
2. Writing is end.
Note:
After installing the driver once, step 3 is unnecessary.
Monday
Monday
Monday
Monday
Sunday
Sunday
Service part initial value
Date/Month/Year
Date/Month/Year
Date/Month/Year
Date/Month/Year
Date/Month/Year
Month/Date/Year
Russian
English
English
English
English
English
Russian
East European
AEP
Canadian
US
First Weekday
Date Format
Language
DESTINATION
CONFIGURATION APPLICATION
NOTE
UK
SET TABLE ACCORDING TO DESTINATION
4. Start writing soft “DPF-v70.exe”.
The [Write Configurations] button becomes effective when
normally connected.
(The following screen is displayed. )
normally connected.
(The following screen is displayed. )
[LITEONTP.VUP]
–Factory Mode
–Write to SDRAM
–Factory Mode
–Write to SDRAM
Click on the first or last page to see other DPF-D100 service manuals if exist.