Read Sony DPF-C1000 / DPF-C700 Service Manual online
DPF-C700/C1000
– 4 –
Note
1-2. DPF-C1000
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
51
4-295-985-01 PANEL,
FRONT
52
3-080-206-21 SCREW,
TAPPING,
P2
53
A-1843-436-A MAIN BOARD, COMPLETE
54
4-295-986-01 SW
(MENU,
B, b, ENTER, 1)
55
A-1843-439-A REAR
PANEL
ASSY
DCJ1
A-1843-437-A DC JACK (DC IN 5V
)
LCD901 A-1843-081-A LCD
ASSY
SERVICE
LCD901
(Note4)
DCJ1
52
52
52
54
51
(Note1)
55
(Note1)
53
(Note2, 3)
Note1:
Follow the disassembly procedure in the numerical order given.
4 Remove all claws while rounding in outer.
6 front cover
– Rear bottom view –
– Front bottom view –
3 four claws
3 four claws
3 four claws
3 four claws
1 two screws
1 two screws
5
Note: Please spread a sheet under a
unit not to injure front panel.
JIG
When disassembling the unit,
use the following jig.
Part No. 9-913-402-33 Tool for Disassembly
use the following jig.
Part No. 9-913-402-33 Tool for Disassembly
2 Insert the jig in the space between the front
cover and the rear cover assy and remove.
Note2: When boards installed by this unit are defective, replace the
complete mouted board. Individual electrical parts that the
mount is done cannot be exchanged.
mount is done cannot be exchanged.
Note3: When the MAIN board in this unit is replaced, it is necessary
to set destination. Execute the setting of destination referring
to “DESTINATION SETTING” (page 5).
to “DESTINATION SETTING” (page 5).
Note4: When exchanging LCD ASSY (LCD901), please install it after
peeling off four sponges of new LCD ASSY (LCD901).
Ver. 1.1 2011.09
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Click on the first or last page to see other DPF-C1000 / DPF-C700 service manuals if exist.