Read Sony SPK-PC3 Service Manual online
– 1 –
SERVICE MANUAL
Canadian Model
AEP Model
UK Model
E Model
SPK-PC3
SPORTS PACK
SPECIFICATIONS
• Microphone block and LS-50 board are replaced as block, so that
printed wiring board, schematic diagram and electrical parts list
are omitted.
are omitted.
Material
Plastic (PC, ABS), glass
Waterproof
Waterproof gasket, buckle
Available operations with the unit
attached
attached
• Turning on/off the POWER switch
when recording or playing back.
• Recording a still image on a tape
(DCR-PC5/PC5E/PC4E/PC3/PC3E/
PC2E/PC1 only)
PC2E/PC1 only)
• Zooming
Built-in microphone
Stereo
Dimension
Approx. 150
×
170
×
110 mm (w / h / d)
Mass
Approx. 550 g (only sports pack)
Supplied accessories
Shoulder strap (1)
Camera mounting shoe
Camera mounting shoe
A (1)/B (1)/C (1)
Tripod screw plate (1, pre-installed on the
camera mounting shoe A)
Reflex prevention ring (2)
Grease (1)
Anti-fogging lens solution (1)
Operating Instructions (1)
camera mounting shoe A)
Reflex prevention ring (2)
Grease (1)
Anti-fogging lens solution (1)
Operating Instructions (1)
Design and specifications subject to change
without notice.
without notice.
Ver 1.3 2005. 12
– 2 –
SECTION 1
GENERAL
SPK-PC3
This section is extracted
from instruction manual.
from instruction manual.
– 3 –
SPK-PC3
– 4 –
1
2
3
3
4
9
6
6
7
8
5
10
15
14
13
16
17
18
19
20
21
22
23
11
12
SECTION 2
REPAIR PARTS LIST
NOTE:
• The mechanical parts with no reference
number in the exploded views are not supplied.
• Items marked “*” are not stocked since
they are seldom required for routine service.
Some delay should be anticipated
when ordering these items.
Some delay should be anticipated
when ordering these items.
• Accessories and packing materials are
given in the last of this parts list.
2-1. EXPLODED VIEWS
2-1-1. R CABINET SECTION
SPK-PC3
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
1
3-051-711-01 PACKING, CABINET
2
3-051-704-01 CABINET, R
* 3
3-959-473-01 SHAFT, HINGE
4
3-051-705-01 BASE, MIRROR
5
3-051-707-01 COVER, MIRROR
6
3-051-562-01 TAPPING +B (2.6) TYPE (2)
7
3-051-706-01 HOOD, MIRROR
8
3-052-415-01 MIRROR
9
3-051-708-01 SHAFT, HOOD
10
3-951-811-01 SCREW (2.6X6) (TYPE 2), +B
11
3-989-442-01 BELT, SHOULDER
12
3-953-086-01 BRACKET
13
3-061-824-01 BASE (A)
14
3-061-825-01 BASE (B)
15
3-061-826-01 BASE (C)
16
2-391-512-00 RING (5), RETAINING, E TYPE
17
A-7028-261-A BASE BLOCK ASSY
* 18
3-970-217-01 SCREW, CAMERA FITTING
19
3-061-827-01 BASE, SLIDE
20
3-055-230-01 RING (37), REFLECTION PREVENTION
(for DCR-PC7/PC10)
21
3-055-231-01 RING (30), REFLECTION PREVENTION
(for DCR-PC1/PC2E/PC3/PC3E/PC4E/PC5/PC5E)
22
3-052-817-01 CUSHION (D)
23
3-061-060-01 CUSHION (E)
