MHS-PM5, MHS-PM5K - Sony Movie Service Manual (repair manual)

mhs-pm5, mhs-pm5k service manual
Model
MHS-PM5 MHS-PM5K
Pages
15
Size
3.24 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie
File
mhs-pm5-mhs-pm5k.pdf
Date

Read Sony MHS-PM5 / MHS-PM5K Service Manual online

MHS-PM5/PM5K
Sony EMCS Co.
SERVICE MANUAL
Revision History
SERVICE  NOTE (Check the following note before the service.)
Ver.
Date
History
Contents
S.M. Rev.
issued
985275112.pdf
2010B2900-1
  © 2010.2
Published by Tokai TEC
Ver. 1.1  2010.02
MOBILE HD SNAP CAMERA
The  components  identified 
by mark 0 or dotted line with 
mark 0 are critical for safety.
Replace only with part number 
specified.
Les  composants  identifiés  par 
une  marque  0  sont  critiques 
pour la sécurité.
Ne les remplacer que par une 
pièce portant le numéro spécifié.
US Model
Canadian Model
AEP Model
E Model
Chinese Model
Japanese Model
Tourist Model
1-1.  METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
1-2.  REGARDING FUSE
Photo: MHS-PM5/Violet
・ 
Addition of Accessories
S.M. Revised: 
Page 2-7
Official Release
Revised-1 
(A1 09-460)
2010.01
2010.02 
1.0
1.1 
9-852-751-12
MHS-PM5/PM5K
Yes 
Internal memory
ON BOARD
Internal memory
ON BOARD
Revised-1
Replacement of the
previously issued
SERVICE MANUAL
9-852-751-11 with
this manual.
MHS-PM5/PM5K
– 2 –
SPECIFICATIONS
– JAPANESE –
概略仕様
– ENGLISH –
Camera
[System]
Image device: 7.13 mm (1/2.5 type) CMOS sensor
Total pixel number of camera:
Approx. 5 038 000 (2 592 × 1 944) pixels
Effective pixel number of camera:
Approx. 5 038 000 (2 592 × 1 944) pixels
(still images), Approx. 2 073 000 pixels
([1920 × 1080 30P] movie)
Lens: F3.6
f = 7.0 mm (9/32 inches)
When converted to a 35 mm still camera
For movies: 47 mm (1 7/8 inches) (16:9)
For still images: 42 mm (1 11/16 inches) (4:3)
Exposure control: Automatic exposure
File format:
Still images: JPEG (DCF Ver. 2.0, Exif
Ver. 2.21, MPF Baseline) compliant
Movies: MPEG-4 AVC/H.264 (.MP4)
Audio: MPEG AAC
Recording media: Internal Memory (approx. 26 MB),
“Memory Stick PRO Duo” media,
SD memory card, SDHC memory card (Class 4, 6, 10)
[Input and Output connectors]
Multi use terminal (A/V-out (SD/HD Component)):
Video output
Audio output
USB jack: type A (built-in)
USB communication: Hi-Speed USB (USB 2.0 compliant)
[LCD screen]
LCD screen: 6.1 cm (2.4 type) TFT drive
Total number of dots: 230 400 (960 × 240) dots
[Power, general]
Power: Rechargeable battery pack NP-BK1, 3.6 V
Power consumption: 1.9 W (when the movie
image size is [1280 × 720 30P])
Operating temperature: 0 to 40 °C (32 to 104 °F)
Storage temperature: – 20 to + 60 °C (– 4 to + 140 °F)
Dimensions: Approx. 19.0 × 108.0 × 54.0 mm
(3/4 × 4 3/8 × 2 1/4 inches) (W/H/D, excluding protrusions)
Mass (including NP-BK1 battery pack, memory card):
Approx. 130 g (4.6 oz)
Microphone: Monaural
Speaker: Monaural
Rechargeable battery pack NP-BK1
Used battery: Lithium-ion battery
Maximum output voltage: DC 4.2 V
Mean output voltage: DC 3.6 V
Maximum charge voltage: DC 4.2 V
Maximum charge current: 1.4 A
Capacity:
typical: 3.4Wh (970mAh)
minimum: 3.3Wh (930mAh)
Design and specifications are subject to change
without notice.
本体
[システム]
撮像素子:
7.13 mm
1/2.5
型)
CMOS
センサー
総画素数:約
504
万画素
カメラ有効画素数:
静止画時有効画素数:約
504
万画素
動画時有効画素数([
1920
×
1080 3
207
万画素
レンズ:
F3.6
f = 7.0mm
35mm
カメラ換算では
動画:
f = 47mm
16 : 9
静止画:
f = 42mm
4 : 3
露出制御:自動
記録方式:
静止画:
JPEG
DCF Ver2.0
Exif
Ver2.21
MPF Baseline
)準拠
動画:
MPEG-4 AVC/H.264
MP4
音声:
MPEG AAC
記録メディア:内蔵メモリー 約
26 MB
“メモリースティック
PRO
デュオ”、
Class 4
6
10
[入出力端子]
A/V OUT
端子:
SD/HD
コンポーネント、
映像出力、音声出力
USB
端子:
type A
(内蔵)、
Hi-Speed USB
USB 2.0
準拠)
[液晶画面]
液晶パネル:
6.1 cm
2.4
型)
TFT
駆動
総ドット数:
230 400
960
×
240
)ドット
[電源・その他]
電源:リチャージャブルバッテリーパック
NP-BK1
3.6 V
消費電力:
1.9 W
(動画サイズが[
1280
×
720 30P
]のとき)
動作温度:
0
40
保存温度:−
20
+ 60
外形寸法:
19.0
×
108.0
×
54.0 mm
(幅×高さ×奥行き、突起部を除く)
本体質量:約
130 g
(リチャージャブルバッテリー
パック
NP-BK1
、メモリーカード含む)
マイクロホン:モノラル
スピーカー:モノラル
リチャージャブルバッテリーパック
NP-BK1
使用電池:リチウムイオン蓄電池
最大電圧:
DC 4.2 V
公称電圧:
DC 3.6 V
容量:
3.4 Wh (970 mAh)
本機や付属品の仕様および外観は、改良のた
め予告なく変更することがありますが、ご了
承ください。
0P
])
SD
メモリーカード、
SDHC
メモリーカード
MHS-PM5/PM5K
– 3 –
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK  0  OR  DOTTED  LINE  WITH 
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST 
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS 
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY 
SONY. 
ATTENTION AU  COMPOSANT  AYANT  RAPPORT 
À  LA  SÉCURITÉ!
LES  COMPOSANTS  IDENTIFIÉS  PAR  UNE  MARQUE  0  SUR  LES 
DIAGRAMMES  SCHÉMATIQUES  ET  LA  LISTE  DES  PIÈCES  SONT 
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT 
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES 
SUPPLÉMENTS PUBLIÉS PAR SONY.
Unleaded solder
Boards requiring use of unleaded solder are printed with the leadfree 
mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with the 
lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•   Unleaded solder melts at a temperature about 40°C higher than ordi-
nary solder.
Ordinary soldering irons can be used but the iron tip has to be applied 
to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to about 
350°C.
Caution:  The printed pattern (copper foil) may peel away if the heated 
tip is applied for too long, so be careful!
•   Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than 
ordinary solder so use caution not to let solder bridges occur such as 
on IC pins, etc.
•   Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may also be 
added to ordinary solder.
SAFETY  CHECK-OUT
After correcting the original service problem, perform the following 
safety checks before releasing the set to the customer.
1.  Check the area of your repair for unsoldered or poorly-soldered 
connections. Check the entire board surface for solder splashes and 
bridges.
2.  Check the interboard wiring to ensure that no wires are “pinched” 
or contact high-wattage resistors.
3.  Look for unauthorized replacement parts, particularly transistors, 
that were installed during a previous repair. Point them out to the 
customer and recommend their replacement.
4.  Look for parts which, through functioning, show obvious signs of 
deterioration. Point them out to the customer and recommend their 
replacement.
5.  Check the B+ voltage to see it is at the values specified.
6.  Flexible Circuit Board Repairing
 
•   Keep the temperature of the soldering iron around 270°C during 
repairing.
 
•   Do not touch the soldering iron on the same conductor of the circuit 
board (within 3 times).
 
•   Be careful not to apply force on the conductor when soldering or 
unsoldering.
1.  注意事項をお守りください。
 
サービスのとき特に注意を要する個所については,キャビ
ネット,シャーシ,部品などにラベルや捺印で注意事項を
表示しています。これらの注意書き及び取扱説明書等の注
意事項を必ずお守り下さい。
2.  指定部品のご使用を
 
セットの部品は難燃性や耐電圧など安全上の特性を持った
ものとなっています。従って交換部品は,使用されていた
ものと同じ特性の部品を使用して下さい。特に回路図,部
品表に0印で指定されている安全上重要な部品は必ず指定
のものをご使用下さい。
3.  部品の取付けや配線の引きまわしはもとどおりに
 
安全上,チューブやテープなどの絶縁材料を使用したり,
プリント基板から浮かして取付けた部品があります。また
内部配線は引きまわしやクランパによって発熱部品や高圧
部品に接近しないよう配慮されていますので,これらは必
ずもとどおりにして下さい。
4.  サービス後は安全点検を
 
サービスのために取外したネジ,部品,配線がもとどおり
になっているか,またサービスした個所の周辺を劣化させ
てしまったところがないかなどを点検し,安全性が確保さ
れていることを確認して下さい。
5.  チップ部品交換時の注意
 
・  取外した部品は再使用しないで下さい。
 
・  タンタルコンデンサのマイナス側は熱に弱いため交換時
は注意して下さい。
6.  フレキシブルプリント基板の取扱いについて
 
・  コテ先温度を270℃前後にして行なって下さい。
 
・  同一パターンに何度もコテ先を当てないで下さい。
 
  (3回以内)
 
・  パターンに力が加わらないよう注意して下さい。
サービス,点検時には次のことにご注意ください。
無鉛半田について
本機には無鉛半田が使用されています。
無鉛半田を使用している基板には,無鉛(Lead  Free)を意味する
レッドフリーマークがプリントされています。
注意: 基板サイズによっては,無鉛半田を使用していてもレッ
ドフリーマークがプリントされていないものがあります)
:レッドフリーマーク
無鉛半田には,以下の特性があります。
・   融点が従来の半田よりも約40℃高い。
従来の半田こてをそのまま使用することは可能ですが,少し長
めにこてを当てる必要があります。温度調節機能のついた半田
こてを使用する場合,約350℃に設定して下さい。
注意:半田こてを長く当てすぎると,基板のパターン(銅箔)が
はがれてしまうことがありますので,注意して下さい。
・   粘性が強い
従来の半田よりも粘性が強いため,IC端子などが半田ブリッジ
しないように注意して下さい。
・   従来の半田と混ぜて使用可能
無鉛半田には無鉛半田を追加するのが最適ですが,従来の半田
を追加しても構いません。
– ENGLISH –
– JAPANESE –
MHS-PM5/PM5K
1-1
1. SERVICE  NOTE
– ENGLISH –
1-1.  METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.) 
Note1:  When replacing main unit, erase the data in internal memory of main unit before replacement.
Note2:  When replacing main unit, execute formatting and initialize the internal memory after replacement.
Method for Formatting the Internal Memory
Method for Copying the Data in Internal Memory
Copies all images in the internal memory to the memory card.
1
Insert the memory card.
2
Select [Copy] with the multi-selector tilt to v/V/b/B, then tilt to B.
The message “All data on internal memory will be copied” appears.
3
Select [OK] with v, then press the multi-selector.
Copying starts.
To cancel the copying
Select [Cancel] in step 3, then press the multi-selector.
• Charge the battery sufficiently. Copying image files when the remaining battery amount is low can cause
data transfer failure or damage the data due to battery exhaustion.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the memory card after copying, then execute the [Format] command in [Internal
Memory Tool].
• When you copy the data in the internal memory to the memory card, a new folder is created. You cannot
choose a specific folder on the memory card as the destination for the data to be copied.
Copy
This item appears only when the memory card is not inserted in the camera.
Formats data stored in the internal memory.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1
Select [Format] with the multi-selector tilt to v/V/b/B, then tilt to B.
The message “All data on internal memory will be erased” appears.
2
Select [OK] with v, then press the multi-selector.
The format is completed.
To cancel the formatting
Select [Cancel] in step 2, then press the multi-selector.
Format
Page of 15
Display

Download Sony MHS-PM5 / MHS-PM5K Service Manual (Repair Manual)

Here you can read online and download Sony MHS-PM5 / MHS-PM5K Service Manual in PDF. MHS-PM5 / MHS-PM5K service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony MHS-PM5 / MHS-PM5K Movie. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.