Read Sony HDR-XR150 / HDR-XR150E / HDR-XR155E (serv.man2) Service Manual online
HDR-XR150/XR150E/XR155E_L2
3-1E
3. ASSEMBLY
Assembly-1:
The Method of attachment of FP-1183
Flexible Board
Flexible Board
1 Fold dotted line parts of the FP-1183 flexible
board as shown in figure.
board as shown in figure.
FP-1183 Flexible Board
Unite corners.
Valley
fold
fold
Valley
fold
fold
Mountain fold
Adhesive tape
Adhesive
tape
tape
Mountain fold
2 Install the flexible clamp in the hinge assy
as shown in figure.
4 Install the hinge cover O.
3 Install the the magnet to the hinge cover U
with the magnet.
with the magnet.
5 Roll the FP-1183 flexible board 2.5 times
in the hinge assy as shown in figure.
in the hinge assy as shown in figure.
2.5 times
Hinge Assy
Adhesive Part
Claws
Hinge Cover U
Hinge Cover O
Magnet
Assembly-2:
Installation Caution of the FPC Clamper
The FP-1183 flexible board must be caught
by FPC clamper as shown in the figure.
by FPC clamper as shown in the figure.
FP-1183 Flexible Board
FPC Clamper
Assembly-3:
Installation Caution of the FP-1191
Flexible Board
Flexible Board
JK-395 Board
Push the FP-1191 flexible board as shown below.
VC-590 Board
FP-1191
Flexible Board
Flexible Board
Assembly-4:
Installation Cautions of
the DC Jack Harness and
the FP-1190 Flexible Board
the DC Jack Harness and
the FP-1190 Flexible Board
Route the DC Jack Harness and the FP-1190 flexible board
as shown below.
as shown below.
JK Holder G (328)
DC Jack
Harness
Harness
Lib
Lib
Lib
FP-1190
Flexible Board
Flexible Board
Fold
Route the DC jack harness as shown below.
Route the harnesses to inside of the connector.
Libs
(Harness Holder (328))
(Harness Holder (328))
Assembly-5:
Installation Caution of the
Control Switch Block (PS32800)
Control Switch Block (PS32800)
Chassis
(BT Frame)
(BT Frame)
Control Switch
Block (PS32800)
Block (PS32800)
Click on the first or last page to see other HDR-XR150 / HDR-XR150E / HDR-XR155E (serv.man2) service manuals if exist.