Ver. 1.1 2007.03
Sony EMCS Co.
Published by Kohda TEC
File this supplement with the service manual.
• Addition of “PROCESS AFTER FIXING FLASH ERROR”
: Points added portion.
1-4. SELF-DIAGNOSIS FUNCTION
1-4-3. Self-diagnosis Code Table
(Service manual page 1-3)
Abnormality when flash is being charged.
Checking of flash unit or replacement of flash unit. (Note)
Note: After repair, be sure to perform “1-5. PROCESS AFTER FIXING FLASH ERROR”.
1-5. PROCESS AFTER FIXING FLASH ERROR
When “FLASH error” (Self-diagnosis Code E:91:01) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash
is changed automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Flash error code can be initialized by execution of “Clear All record-data”.
Note: For “Clear All record-data”, refer to Service Manual, ADJ (“6. Record Data” of “3-2. SERVICE MODE”).
1. SERVICE NOTE
Hong Kong Model