Read Sony HDR-UX1 / HDR-UX1E (serv.man4) Service Manual online
6-2
HDR-UX1/UX1E_ADJ
• Adjusting items when replacing a board or EEPROM
When replacing a board or EEPROM, adjust the items indicated by z in the following table.
When replacing a board or EEPROM, adjust the items indicated by z in the following table.
Table 6-1-1 (2)
Note 2: When the repair is finished,
confirm the following items.
1. Shoot the all black subject, and
confirm that a vertical line is not
displayed in the center of the
screen, and that there is no differ-
ence in left-right brightness level
of the screen.
displayed in the center of the
screen, and that there is no differ-
ence in left-right brightness level
of the screen.
2. Shoot a subject of low light, and
confirm that a vertical line is not
displayed in the center of the
screen, and that there is no differ-
ence in left-right brightness level
of the screen.
displayed in the center of the
screen, and that there is no differ-
ence in left-right brightness level
of the screen.
3. Shoot a subject of normal light, and
confirm that a vertical line is not
displayed in the center of the
screen, and that there is no differ-
ence in left-right brightness level
of the screen.
When the above symptom occurs,
perform the whole process of “Dif-
ferential Gain Adjustment”.
displayed in the center of the
screen, and that there is no differ-
ence in left-right brightness level
of the screen.
When the above symptom occurs,
perform the whole process of “Dif-
ferential Gain Adjustment”.
Note 3: IC1601 (HI/DS control,
Flash memory) on the VC-
456 board and IC4302 (Flash
memory) on the MD-131
board cannot be replaced.
456 board and IC4302 (Flash
memory) on the MD-131
board cannot be replaced.
CM-074 board (COMPLETE)
VC-456 board (COMPLETE)
BL-003 board (COMPLETE)
MD-131 board (COMPLETE)
PD-291 board (COMPLETE)
VC-456 board IC1402 (EEPROM)
Destination
Data Write
Data Write
Destination Data Write
z
(Note 1)
Origin oscillation check
z
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
VIDEO OUT level check
COMPONENT OUT Y level adj.
COMPONENT OUT Pb level adj.
COMPONENT OUT Pr level adj.
HALL adj.
MR adj.
Differential gain adj.
S VIDEO OUT chroma level adj.
VIDEO OUT level check
COMPONENT OUT Y level adj.
COMPONENT OUT Pb level adj.
COMPONENT OUT Pr level adj.
HALL adj.
MR adj.
Differential gain adj.
CAMERA
adjustment 2
adjustment 2
Flange back adj.
z
z
z
CAMERA
adjustment 3
adjustment 3
Flange back check
z
z
z
F No. & ND light qualiy
standard data input
Mechanical shutter adj.
Linear matrix adj.
AWB standard data input
LV standard data input
AWB adj.
Color reproduction adj.
MAX GAIN adj.
White defect adj.
Black defect adj.
Strobe light level adj.
Strobe white balance adj.
standard data input
Mechanical shutter adj.
Linear matrix adj.
AWB standard data input
LV standard data input
AWB adj.
Color reproduction adj.
MAX GAIN adj.
White defect adj.
Black defect adj.
Strobe light level adj.
Strobe white balance adj.
CAMERA
adjustment 7
adjustment 7
Steady shot check
z
LCD/EVF automatic adj.
White balance adj. (EVF)
V-COM adj. (LCD)
White balance adj. (EVF)
V-COM adj. (LCD)
Transmissive mode
white balance adj. (LCD)
Reflective mode
white balance adj. (LCD)
Sample hold phase adj. (LCD)
white balance adj. (LCD)
Reflective mode
white balance adj. (LCD)
Sample hold phase adj. (LCD)
AUDIO
adjustment
adjustment
Internal 4ch microphone sensitivity adj.
z
POWER adj.
z
SERVO adj.
z
AUDIT
Touch panel adj.
z
Touch panel
adjustment
adjustment
LCD/EVF
adjustment
adjustment
z
z
z
z
CAMERA
adjustment 6
adjustment 6
z
CAMERA
adjustment 4
adjustment 4
z
CAMERA
adjustment 5
adjustment 5
z
z
z
z
z
z
CAMERA
adjustment 1
adjustment 1
z
z
Adjusting item
Adjustment
VIDEO
adjustment
adjustment
Board
replacement
EEPROM
replacement
z
Click on the first or last page to see other HDR-UX1 / HDR-UX1E (serv.man4) service manuals if exist.