HDR-SR5, HDR-SR5C, HDR-SR5E, HDR-SR7, HDR-SR7E, HDR-SR8, HDR-SR8E (serv.man4) - Sony Movie Service Manual (repair manual). Page 8

6-7

HDR-SR5/SR5C/SR5E/SR7/SR7E/SR8/SR8E_ADJ

When the Automatic Adjustment Program started, the Main Menu
screen in Fig. 6-1-9 will appear. On this screen, select each adjust-
ment section.

1

[Connecting the Equipment] button
A connection diagram of the equipment is displayed.

2

[CONNECT] button
The mode of Camcorder is switched to the Adjustment Mode.
When the Adjustment Mode has switched normally, the op-
eration of the buttons 4 - qa is enabled.

3

[END] button
The mode of Camcorder is switched to the normal mode.
When the normal mode has switched correctly, the Automatic
Adjustment Program is finished.

4

[DESTINATION DATA WRITE] button
The “DESTINATION DATA WRITE” screen appears.

5

[USB SERIAL No. INPUT] button
The “USB SERIAL No. INPUT” screen appears.

6

[VIDEO SYSTEM ADJUSTMENT] button
The “VIDEO SYSTEM ADJUSTMENT” screen appears.

7

[CAMERA SYSTEM ADJUSTMENT] button
The “CAMERA SYSTEM ADJUSTMENT” screen appears.

8

[LCD/EVF SYSTEM ADJUSTMENT] button
The “LCD/EVF SYSTEM ADJUSTMENT” screen appears.

9

[AUDIO SYSTEM ADJUSTMENT] button
The “AUDIO SYSTEM ADJUSTMENT” screen appears.

q;

[SERVICE MODE] button
The “SERVICE MODE” screen appears.

qa

[DATA BACKUP] button
The “DATA BACKUP” screen appears.

qs

This part indicates the version of Automatic Adjustment Pro-
gram.

The HDR-SR5/SR5C/SR5E/SR7/SR7E/SR8/SR8E are adjusted by
the Automatic Adjustment Program. The Automatic Adjustment
Program enters automatically via the SeusEX the adjustment op-
erations that were formerly entered manually by the adjustment
remote commander (some items may be adjusted by manual op-
eration on the operation screen of the SeusEX).

1) The Automatic Adjustment Program writes the adjustment re-

sults such as EVR data to the set through two-way communi-
cation with the camcorder via the SeusEX. Accordingly, the
Automatic Adjustment Program must be used in the environ-
ment where the SeusEX operates.

2) The Automatic Adjustment Program cannot be used when the

SEUS or the SeusCam is running. Exit the SEUS or the
SeusCam before using the Automatic Adjustment Program.

3) The SeusEX must be already started on the PC when using the

Automatic Adjustment Program. With the SeusEX not started,
some adjustment items will take time in adjustment.

4) The program run time may vary depending on the environ-

ment of the personal computer used.

Double-click the application file (HDR-SR7 Series Auto-Adj
Ver_1.2r03.exe), and the Automatic Adjustment Program will start.

3

5

4

7

8

6

2

1

q;

qa

qs

9