Read Sony HDR-PJ780E / HDR-PJ780VE / HDR-PJ790 / HDR-PJ790E / HDR-PJ790V / HDR-PJ790VE (serv.man2) Service Manual online
1-9
HDR-PJ780E/PJ780VE/PJ790/PJ790E/PJ790V/PJ790VE_L2
– ENGLISH –
Screw
Screw
Boss
Boss
Boss
Bosses
Connector
(13)
(14)
Remove the screw and remove the five bosses and disconnect
the connector to detach the Sheet Metal (D-Sub) and the
LF-148 Flexible Board.
the connector to detach the Sheet Metal (D-Sub) and the
LF-148 Flexible Board.
Remove the bond.
(15) Remove the screw to detach the Sheet Metal (A).
Bond
LF-148 Flexible Board,
Sheet Metal (D-Sub)
Sheet Metal (D-Sub)
Sheet Metal (A)
TO
P
FRONT
TO
P
FRO
NT
TO
P
FR
ONT
Front Ornament
Boss
Claw
(16) Remove the boss and the claw to detach the
Front Ornament.
TO
P
FRONT
Boss
Claw
Installation
(1) While installing the boss and the claw, install the Front
Ornament.
Screw
(2)
Install the Sheet Metal (A) and tighten a screw.
Tightening torque = 0.12 ± 0.01N · m (1.2 ± 0.1kg f · cm)
Sheet Metal (A)
Polyimide Sheet
(3)
Cut the Polyimide Sheet to the specified length and stick it.
7.0mm
5.0mm
Front Ornament
TO
P
FRONT
TO
P
FR
ONT
TO
P
FRO
NT
(4)
Connect the connector and install the Sheet Metal (D-Sub) and the
LF-148 Flexible Board while attaching the five bosses, and then
tighten a screw.
LF-148 Flexible Board while attaching the five bosses, and then
tighten a screw.
Tightening torque = 0.18 ± 0.01N · m (1.8 ± 0.1kg f · cm)
Note: Check that the boss with the mark is completely engaged.
Screw
Boss
Boss
Boss
Boss
Boss
Connector
LF-148 Flexible Board,
Sheet Metal (D-Sub)
Sheet Metal (D-Sub)
Sheet Metal (D-Sub)
LF-148 Flexible Board
LF-148 Flexible Board
TO
P
FR
ONT
Adhesive
Sheet
Sheet
If the adhesive force is lowered, cut the Adhesive Sheet as
shown in the figure in the frame and then stick it.
shown in the figure in the frame and then stick it.
Adhesive Part
Shape and sticking
position of Adhesive
Sheet
position of Adhesive
Sheet
Click on the first or last page to see other HDR-PJ780E / HDR-PJ780VE / HDR-PJ790 / HDR-PJ790E / HDR-PJ790V / HDR-PJ790VE (serv.man2) service manuals if exist.