Read Sony HDR-FX7 / HDR-FX7E (serv.man4) Service Manual online
6-23
HDR-FX7/FX7E_ADJ
14. AE Page table
Note 1:
Note 1:
If reading/writing data on pages AE, set data: 0A to page:
0, address: 10, and then select pages: E. By this data set-
ting, the pages AE can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: E. By this data set-
ting, the pages AE can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to 53
Fixed data-1 (Initialized data)
54
55
Fixed data-2
56 to 83
Fixed data-1 (Initialized data)
84
Fixed data-2
85 to 8F
Fixed data-1 (Initialized data)
11. 9E Page table
Note 1:
Note 1:
If reading/writing data on pages 9E, set data: 09 to page:
0, address: 10, and then select pages: E. By this data set-
ting, the pages 9E can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: E. By this data set-
ting, the pages 9E can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to 7C
Fixed data-1 (Initialized data)
7D
Fixed data-2
7E to FF
Fixed data-1 (Initialized data)
13. AD Page table
Note 1:
Note 1:
If reading/writing data on pages AD, set data: 0A to page:
0, address: 10, and then select pages: D. By this data
setting, the pages AD can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: D. By this data
setting, the pages AD can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00, 01
Fixed data-1 (Initialized data)
10. 9D Page table
Note 1:
Note 1:
If reading/writing data on pages 9D, set data: 09 to page:
0, address: 10, and then select pages: D. By this data
setting, the pages 9D can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: D. By this data
setting, the pages 9D can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to 4F
Fixed data-1 (Initialized data)
12. 9F Page table
Note 1:
Note 1:
If reading/writing data on pages 9F, set data: 09 to page:
0, address: 10, and then select pages: F. By this data set-
ting, the pages 9F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: F. By this data set-
ting, the pages 9F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to F3
Fixed data-1 (Initialized data)
Click on the first or last page to see other HDR-FX7 / HDR-FX7E (serv.man4) service manuals if exist.