Read Sony HDR-FX1000 / HDR-FX1000E (serv.man3) Service Manual online
SECTION 6
ADJUSTMENTS
Revision History
Revision History
Sony Corporation
ADJ
Ver. 1.3 2011.05
HDR-FX1000/FX1000E_ADJ
Link
Link
Adjusting items when replacing main parts and boards
List of service tools
Before starting adjustments
TAPE PATH ADJUSTMENT
HOW TO ENTER PLAYBACK MODE WITHOUT
CASSETTE
CASSETTE
HOW TO ENTER RECORD MODE WITHOUT
CASSETTE
CASSETTE
MECHANISM SECTION ADJUSTMENTS
AUDIO SYSTEM ADJUSTMENTS
VIDEO SYSTEM ADJUSTMENTS
SERVO AND RF SYSTEM ADJUSTMENTS
SYSTEM CONTROL SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
VIDEO SECTION ADJUSTMENTS
SERVICE MODE
DATA PROCESS
ADJUSTMENT REMOTE COMMANDER (RM-95)
SERVICE MODE
ADJUSTMENT REMOTE COMMANDER
(NEW LANC JIG)
(NEW LANC JIG)
NTSC MODEL: HDR-FX1000
PAL MODEL: HDR-FX1000E
PAL MODEL: HDR-FX1000E
ELECTRONIC VIEWFINDER SYSTEM
ADJUSTMENTS
ADJUSTMENTS
LCD SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
INITIALIZATION OF EVR DATA
CAMERA SECTION ADJUSTMENTS
RMT-831
HDR-FX1000/FX1000E
2011E08-1
© 2011.05
Published by Sony Techno Create Corporation
9-852-622-54
6-1
HDR-FX1000/FX1000E_ADJ
SECTION 6
ADJUSTMENTS
1.
Before starting adjustments
EVR Data Re-writing Procedure When Replacing Board
The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 or procedure 3 when replacing board.
Procedure 1
Save the EVR data of the machine in which a board is going to be replaced. Download the saved data after a
board is replaced.
board is replaced.
Remove the EEPROM and install it.
(Former board)
(New board)
Procedure 2
Remove the EEPROM from the board of the machine that is going to be repaired. Install the removed
EEPROM to the replaced board.
EEPROM to the replaced board.
Procedure 3
When the data cannot be saved due to defective EEPROM, or when the EEPROM cannot be removed or
installed, save the data from the same model of the same destination, and download it.
installed, save the data from the same model of the same destination, and download it.
After the EVR data is saved and downloaded, check the
respective items of the EVR data.
(Refer to page 6-3 for the items to be checked)
respective items of the EVR data.
(Refer to page 6-3 for the items to be checked)
(Machine before starting repair)
(Machine after a board is replaced)
PC
PC
Save the EVR data
to a personal computer.
to a personal computer.
Download the saved
data to a machine.
data to a machine.
(Machine to be repaired)
(Machine to be repaired)
(The same model of the same destination)
Save the data.
Download the data.
PC
6-2
HDR-FX1000/FX1000E_ADJ
1-1. Adjusting items when replacing main parts and boards
•
Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
Note 1:
When replacing the drum assy or the mechanism deck, reset the data of page: 7, address: A8 to AB to “00”. (Refer to “Record of
Use check” of “6-4. SERVICE MODE”)
Use check” of “6-4. SERVICE MODE”)
Note 2:
If the lens is broken, it must be replace with the already adjusted lens.
Table 6-1-1 (1)
Adjustment Section
Adjustment
(3.2 inch wide color LCD unit)
(Backlight)
(Color EVF unit)
(Drum assembly) (Note 1)
(PITCH, YAW sensor)
(Oscillator)
(Camera signal processor)
(Base band signal processor, etc.)
(DV signal processor, etc.)
(Video out AMP)
(Component out AMP)
(REC/PB AMP)
(EVF drive, etc.)
(LCD drive, etc.)
Lens Block (Note 2)
LCD block LCD901
LCD block D901
EVF block LCD902
Mechanism deck (Note 1)
Mechanism deck M901
Mechanism deck MD block
GY-014 board SE8501, 8502
VC-543 board X1401
VC-543 board IC1401
VC-543 board IC1801
VC-543 board IC2601
VC-543 board IC2002
VC-543 board IC2001
MD-141 board IC5201
VF-178 board IC6201
PD-372 board IC6001
Initialization of
Initialization of A, B, D, 1A, 1B page data
EVR data
Initialization of 8, 9, C, 13, 18, 1C, 1D, 1E page
data
Initialization of camera control page data
data
Initialization of camera control page data
Camera
Origin oscillation check
z
PSD sensor adj
Lens adj.
.
z
MR sensor (Focus/Zoom Ring) adj.
z
Coaxial harness connecting check
z
Flange back adj.
Black balance adj.
Black balance adj.
z
z
z
z
z
z
z
z
z
Auto white balance standard data input
z
z
z
LV standard data input
z
z
z
STD GAIN adj.
z
z
z
Auto white balance adj.
z
z
z
Color reproduction adj.
z
z
z
White defect adj.
z
z
Black defect adj.
z
z
Angular velocity sensor sensitivity adj.
z
EVF
EVF gain adj.
z
LCD
PANEL gain adj.
z
z
V-COM adj.
z
z
Transmissive mode white balance adj.
z
z
z
Mechanism
Tape path adj.
z
z
z
System control
Node
unique
ID No. input
Servo, RF
CAP FG duty adj.
z
z
Switching position adj.
z
z
z
SD Error rate check
z
z
z
z
z
Video
S VIDEO OUT Y level adj.
z
z
S VIDEO OUT chroma level adj.
z
z
VIDEO OUT level check
z
z
COMPONENT OUT Y level adj.
z
z
COMPONENT OUT Pr level adj.
z
z
COMPONENT OUT Pb level adj.
z
z
z
z
PRISM device (Inclding CM-097 and CM-104 board and CMOS imager
(IC3001/IC5001))
Replaced part
Block replacement
Mounted part replacement
MAX GAIN adj.
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2008.11
6-3
HDR-FX1000/FX1000E_ADJ
Note 3:
IC2402, IC3804 (Flash memo-
ries) on the VC-543 board can-
not be replaced.
ries) on the VC-543 board can-
not be replaced.
•
Adjusting items when replacing a board or EEPROM
When replacing a board or EEPROM, adjust the items indicated by z in the following table.
Table 6-1-1 (2)
Adjustment Section
Adjustment
(COMPLETE)
(COMPLETE)
(COMPLETE)
(COMPLETE)
(COMPLETE)
GY-014 board
VC-543 board
MD-141 board
VF-178 board
PD-372 board
(EEPROM)
VC-543 board IC3805
Supporting
Initialization of
Initialization of A, B, D, 1A, 1B page data
z
EVR data
Initialization of 8, 9, C, 13, 18, 1C, 1D, 1E page
data
data
z
Initialization of camera control page data
z
Camera
Origin oscillation check
z
PSD sensor adj.
Lens adj.
z
MR sensor (Focus/Zoom Ring) adj.
z
z
z
z
z
z
Coaxial harness connecting check
z
z
Flange back adj.
Black balance adj.
Black balance adj.
z
z
Auto white balance standard data input
z
z
LV standard data input
z
z
STD GAIN adj.
MAX GAIN adj.
z
z
Auto white balance adj.
z
z
Color reproduction adj.
z
z
White defect adj.
z
z
Black defect adj.
z
z
Angular velocity sensor sensitivity adj.
z
z
EVF
EVF gain adj.
z
z
LCD
PANEL gain adj.
z
z
z
V-COM adj.
z
Transmissive mode white balance adj.
z
z
Mechanism
Tape path adj.
System control
Node
unique
ID No. input
z
Servo, RF
CAP FG duty adj.
z
z
z
Switching position adj.
z
z
z
SD Error rate check
z
z
z
Video
S VIDEO OUT Y level adj.
z
S VIDEO OUT chroma level adj.
z
VIDEO OUT level check
z
COMPONENT OUT Y level adj.
z
COMPONENT OUT Pr level adj.
z
COMPONENT OUT Pb level adj.
z
z
Replaced part
RadarW
RadarW
RadarW
z
z
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2008.11
