Read Sony HDR-FX1000 / HDR-FX1000E (serv.man2) Service Manual online
2-1
2. DISASSEMBLY
HDR-FX1000/FX1000E_L2
NOTE FOR REPAIR
• Make sure that the flat cable and flexible board are not cracked of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, don’t pull at wire of connector. It is possible that a wire is snapped.
• When installing a connector, don’t press down at wire of connector.
It is possible that a wire is snapped.
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
Harness
(coaxial cable)
(coaxial cable)
Tweezers etc.
NOTE FOR DISCONNECTING THE HARNESS (COAXIAL CABLE)
When disconnecting the harness (COAXIAL CABLE), do not
pull the harness part but pull off the connector body with tweezers
etc.
pull the harness part but pull off the connector body with tweezers
etc.
Click on the first or last page to see other HDR-FX1000 / HDR-FX1000E (serv.man2) service manuals if exist.