Read Sony HDR-FX1 / HDR-FX1E (serv.man2) Service Manual online
SERVICE MANUAL
Revision History
Revision History
LEVEL
1
Link
Link
Sony EMCS Co.
HDR-FX1/FX1E
• INSTRUCTION MANUAL is shown at the end of this document.
Ver 1.2 2009. 10
ACCESSORIES
SELF DIAGNOSIS FUNCTION
SPECIFICATIONS
ACCESSORIES
SELF DIAGNOSIS FUNCTION
SPECIFICATIONS
2009J0800-1
©2009.10
Published by Tokai TEC
9-876-770-42
DIGITAL HD VIDEO CAMERA RECORDER
Photo : HDR-FX1
HDR-FX1
US Model
Canadian Model
Korea model
HDR-FX1E
AEP model
UK model
Australian model
Chinese moedl
Hong Kong model
HDR-FX1/FX1E
E model
Tourist model
HDR-FX1/FX1E
RMT-840
Z (Z310) MECHANISM
Replace the previously issued
SERVICE MANUAL 9-876-770-41
with this Manual.
SERVICE MANUAL 9-876-770-41
with this Manual.
Revised-1
— 2 —
HDR-FX1/FX1E
SPECIFICATIONS
System
Video recording system (HDV)
2 rotary heads, Helical scanning system
Video recording system (DV)
2 rotary heads, Helical scanning system
Audio recording system (HDV)
Rotary heads, MPEG-1 Audio Layer2
Quantization: 16 bits (Fs 48 kHz, stereo)
Transfer rate: 384 kbps
Quantization: 16 bits (Fs 48 kHz, stereo)
Transfer rate: 384 kbps
Audio recording system (DV)
Rotary heads, PCM system
Quantization: 12 bits (Fs 32 kHz, stereo 1,
stereo 2), 16 bits (Fs 48 kHz, stereo)
Quantization: 12 bits (Fs 32 kHz, stereo 1,
stereo 2), 16 bits (Fs 48 kHz, stereo)
Video signal
N
HDR-FX1:
TSC color, EIA standards, 1080/60i
specification
HDR-FX1E:
HDR-FX1E:
Usable cassette
Mini DV cassette with the
mark
printed
Tape speed (HDV)
Approx. 18.81 mm/s
Tape speed (DV)
SP: Approx. 18.81 mm/s
LP: Approx. 12.56 mm/s
LP: Approx. 12.56 mm/s
Recording/playback time (HDV)
60 min (using a DVM60 cassette)
Recording/playback time (DV)
SP: 60 min (using a DVM60 cassette)
LP: 90 min (using a DVM60 cassette)
LP: 90 min (using a DVM60 cassette)
Fast forward/rewind time
Approx. 2 min 40 s (using a DVM60 cassette)
Viewfinder
Electric viewfinder (color)
Image device
6 mm (1/3 type) 3CCD (Charge Coupled
Device)
Gross: Approx. 1 120 000 pixels
Effective: Approx. 1 070 000 pixels
Device)
Gross: Approx. 1 120 000 pixels
Effective: Approx. 1 070 000 pixels
Lens
Carl Zeiss Vario-Sonnar T*
Combined power zoom lens
Filter diameter: 72 mm (2 7/8 in.)
12 (O ptical)
F = 1.6 ~ 2.8
Combined power zoom lens
Filter diameter: 72 mm (2 7/8 in.)
12 (O ptical)
F = 1.6 ~ 2.8
Focal length
4.5 - 54 mm (3/16 - 2 1/4 in.)
When converted to a 35 mm still camera
32.5 - 390 mm (1 5/16 - 15 3/8 in.)
(40 - 480 mm (1 5/8 - 19 in.) in 4:3 TV mode)
When converted to a 35 mm still camera
32.5 - 390 mm (1 5/16 - 15 3/8 in.)
(40 - 480 mm (1 5/8 - 19 in.) in 4:3 TV mode)
Color temperature
[AUTO], [ONE-PUSH A/B], [INDOOR]
(3 200 K), [OUTDOOR] (5 800 K)
(3 200 K), [OUTDOOR] (5 800 K)
Minimum illumination
3 lx (lux) (F 1.6)
Input/Output connectors
Audio/Video input/output
Video signal: 1 Vp-p, 75
Ω
(ohms),
unbalanced, sync negative
Audio signal: 327 mV (at load impedance
47 k
Audio signal: 327 mV (at load impedance
47 k
Ω
(kilohms)), Input impedance more than
47 k
Ω
(kilohms), Output impedance less than
2.2 k
Ω
(kilohms)
S VIDEO input/output
Luminance signal: 1 Vp-p, 75
Ω
(ohms),
un
HDR-FX1:
HDR-FX1:
balanced
Chrominance signal: 0.286 Vp-p, 75
Ω
(ohms), unbalanced
HDR-FX1E:
HDR-FX1E:
COMPONENT OUTPUT jack
Y: 1 Vp-p (0.3 V sync negative)
P
P
B
/P
R
, C
B
/C
R
: +/- 350 mVp-p, Input
impedance 75
Ω
(ohms)
Headphones jack
Stereo minijack (Ø 3.5 mm)
LANC jack
Stereo mini-minijack (Ø 2.5 mm)
MIC jack
Minijack, 0.388 mV low impedance with DC
2.5 to 3.0 V, output impedance 6.8 k
2.5 to 3.0 V, output impedance 6.8 k
Ω
(kilohms) (Ø 3.5 mm), Stereo type
HDV/DV jack
i.LINK Interface (IEEE1394, 4-pin connector
S100)
S100)
LCD screen
Picture
8.8 cm (3.5 type)
Total dot number
250 000 (1 120
×
224)
General
Power requirements
DC 7.2 V (battery pack)
DC 8.4 V (AC Adaptor)
DC 8.4 V (AC Adaptor)
Average power consumption (when using the
battery pack)
battery pack)
During camera recording using the viewfinder
w
HDR-FX1:
w
HDR-FX1:
ith normal brightness:
HDV recording 7.4 W
DV recording 6.9 W
HDR-FX1E:
DV recording 6.9 W
HDR-FX1E:
During camera recording using the LCD with
normal brightness:
normal brightness:
H
HDR-FX1:
DV recording 8.0 W
DV recording 7.5 W
HDR-FX1E:
HDR-FX1E:
Operating temperature
0
°
C to 40
°
C (32
°
F to 104
°
F)
Storage temperature
-20
°
C to + 60
°
C (-4
°
F to + 140
°
F)
Dimensions (approx.)
151
×
181
×
365 mm (6
×
7 1/4
×
14 3/8 in.)
(w/h/d)
Mass (Approx.)
2.0 kg (4 lb 6 1/2 oz) main unit only
2.1 kg (4 lb 10 1/8 oz) including the NP-F570
rechargeable battery pack, DVM60 cassette
and lens hood.
2.1 kg (4 lb 10 1/8 oz) including the NP-F570
rechargeable battery pack, DVM60 cassette
and lens hood.
Supplied accessories
See page 4.
AC Adaptor AC-L15A/L15B
Power requirements
AC 100 - 240 V, 50/60 Hz
Current consumption
0.35 - 0.18 A
Power consumption
18 W
Output voltage
DC 8.4 V, 1.5 A
Operating temperature
0
°
C to 40
°
C (32
°
F to 104
°
F)
Storage temperature
-20
°
C to + 60
°
C (-4
°
F to + 140
°
F)
Dimensions (approx.)
56
×
31
×
100 mm (2 1/4
×
1 1/4
×
4 in.) (w/h/
d) excluding the projecting parts
Mass (approx.)
190 g (6.7 oz) excluding the power cord
Rechargeable battery pack (NP-F570)
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
15.8 Wh (2 200 mAh)
Dimensions (approx.)
38.4
×
20.6
×
70.8 mm
(1 9/16
×
13/16
×
2 7/8 in.) (w/h/d)
Mass (approx.)
100 g (3.5 oz)
Operating temperature
0
°
C to 40
°
C (32
°
F to 104
°
F)
Type
Lithium ion
Design and specifications are subject to ch
without notice.
without notice.
PAL color, CCIR standards, 1080/50i
specification
specification
Chrominance signal: 0.3 Vp-p, 75
Ω
(ohms),
unbalanced
HDV recording 7.3 W
DV recording 6.9 W
DV recording 6.9 W
HDV recording 7.9 W
DV recording 7.5 W
DV recording 7.5 W
— 3 —
HDR-FX1/FX1E
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Replace only with the same or equivalent type.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
— 4 —
HDR-FX1/FX1E
Checking supplied accessories.
Note 1:
The components identified by
mark
mark
0
or dotted line with mark
0
are critical for safety.
Replace only with part number
specified.
specified.
Note 1:
Les composants identifiés par
une marque
une marque
0
sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Ne les remplacer que par une
pièce portant le numéro spécifié.
AC adaptor
(AC-L15A/L15B)(1)
(AC-L15A/L15B)(1)
0
1-477-533-
81 (Note 1)
Power cord (Main lead)(1)
(US, CND model)
(US, CND model)
0
1-790-107-
42 (Note 1)
Power cord (Main lead)(1)
(AEP model)
(AEP model)
0
1-690-827-12 (Note 1)
Power cord (Main lead)(1)
(UK model)
(UK model)
0
1-775-843-52 (Note 1)
Power cord (Main lead)(1)
(E model)
(E model)
0
1-769-608-11
(Note 1)
Power cord (Main lead)(1)
(HK model)
(HK model)
0
1-827-269-12 (Note 1)
Power cord (Main lead)(1)
(JE model)
(JE model)
0
1-790-732-12
(Note 1)
Power cord (Main lead)(1)
(KR model)
(KR model)
0
1-776-985-11 (Note 1)
Power cord (Main lead)(1)
(AUS model)
(AUS model)
0
1-827-945-11
(Note 1)
Power cord (Main lead)(1)
(CH model)
(CH model)
0
1-782-476-13
(Note 1)
Lens hood (1)
2-186-430-01
2-186-430-01
Large eyecup (1)
2-179-414-01
2-179-414-01
Fixed Screw Hood
9-913-200-19
(Note 2)
9-913-200-19
(Note 2)
Screw, Tapping, P2
3-080-204-31
3-080-204-31
ns
ns
Lid battery
case (1)
3-742-854-01
case (1)
3-742-854-01
Wireless remote commander
(RMT-840)(1)
1-478-953-21
(RMT-840)(1)
1-478-953-21
R6 (size AA) batteries
for the Remote
Commander (2)
(Not supplied)
for the Remote
Commander (2)
(Not supplied)
A/V connecting cable (1)
1-824-097-11
1-824-097-11
Component video cable (1)
1-829-414-21
1-829-414-21
Shoe adaptor (1)
X-2023-305-1
X-2023-305-1
Shoulder strap (1)
2-021-016-01
2-021-016-01
21-pin adaptor (1)
(AEP, UK model)
1-770-783-21
(AEP, UK model)
1-770-783-21
2-pin conversion adaptor (1)
(JE model)
(JE model)
0
1-569-007-12
(Note 1)
2-pin conversion adaptor (1)
(E, HK model)
(E, HK model)
0
1-569-008-21
(Note 1)
Rechargeable battery pack
(NP-F570)(1)
(Not supplied)
(NP-F570)(1)
(Not supplied)
Cleaning cassette
(DVM-4CLD J)(1)
8-883-121-64
(DVM-4CLD J)(1)
8-883-121-64
Other accessories
2-178-348-11 MANUAL, INSTRUCTION (ENGLISH)(FX1:US,CND,E,JE)
2-178-348-21 MANUAL, INSTRUCTION (FRENCH)(FX1:CND)
2-178-348-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE)
2-178-348-21 MANUAL, INSTRUCTION (FRENCH)(FX1:CND)
2-178-348-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE)
(FX1:E,JE)
2-178-348-41 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
(FX1:E)
2-178-348-51 MANUAL, INSTRUCTION (KOREAN)(FX1:JE,KR)
2-178-349-11 MANUAL, INSTRUCTION (ENGLISH)(FX1E)
2-178-349-21 MANUAL, INSTRUCTION (RUSSIAN)(FX1E:E,JE,AEP)
2-178-349-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE)
2-178-349-21 MANUAL, INSTRUCTION (RUSSIAN)(FX1E:E,JE,AEP)
2-178-349-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE)
(FX1E:AEP)
2-178-349-41 MANUAL, INSTRUCTION (FRENCH/GERMAN)(FX1E:AEP)
2-178-349-51 MANUAL, INSTRUCTION (ITALIAN/DUTCH)(FX1E:AEP)
2-178-349-51 MANUAL, INSTRUCTION (ITALIAN/DUTCH)(FX1E:AEP)
2-178-349-61 MANUAL, INSTRUCTION (ARABIC/PERSIAN)(FX1E:E)
2-178-349-71 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
2-178-349-71 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
(FX1E:CH,HK)
2-178-349-81 MANUAL, INSTRUCTION (SIMPLIFIED CHINESE)
(FX1E:E,CH,JE)
• Abbreviation
CND : Canadian model
AUS : Australian model
CH
AUS : Australian model
CH
: Chinese model
HK
: Hong Kong model
KR
: Korea model
JE
: Tourist model
Make sure that the following accessories are supplied with your camcorder.
Note 2: In case of repairing Hood Fixed Screw, be sure
to confirm its mounting direction becomes the
same as original direct
same as original direct
i
on.
ns: not supplied
Ver 1.2 2009.10
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
