Read Sony HDR-CX6EK / HDR-CX7 / HDR-CX7E / HDR-CX7EK / HDR-CX7K (serv.man4) Service Manual online
6-40
HDR-CX6EK/CX7/CX7E/CX7K/CX7EK_ADJ
7.
Shift Lens Check
Use the “Shift Lens Check” when the following self diagnostic
codes are displayed.
• E:62:10 [Shift Lens Initializing Failure]
codes are displayed.
• E:62:10 [Shift Lens Initializing Failure]
• E:62:11 [Shift Lens Overheating (Pitch)]
• E:62:12 [Shift Lens Overheating (Yaw)]
Click the [Shift Lens Check] button on the Service Mode screen,
and the “SHIFT LENS CHECK” screen will appear.
and the “SHIFT LENS CHECK” screen will appear.
[Check 1 using method]
Use this menu when E:62:10 (Shift Lens Initializing Failure) oc-
curred.
Click the [Check 1 Start] button, and the “EEPROM Check” and
“Steady Hall Adjustment” will be executed.
• When “Steady Hall Adjustment” is executed, the shift lens will
Use this menu when E:62:10 (Shift Lens Initializing Failure) oc-
curred.
Click the [Check 1 Start] button, and the “EEPROM Check” and
“Steady Hall Adjustment” will be executed.
• When “Steady Hall Adjustment” is executed, the shift lens will
move in up, down, left, and right directions. If the shift lens
does not move at all and a message “Shift Lens Check 1 Com-
plete” is displayed, or if an error message of Steady Hall Ad-
justment is displayed, replace the lens block.
does not move at all and a message “Shift Lens Check 1 Com-
plete” is displayed, or if an error message of Steady Hall Ad-
justment is displayed, replace the lens block.
• Check the peripheral circuits (particularly EEPROM (IC1804))
of the IC1803 on the VC-493 board, when the following mes-
sage is displayed.
sage is displayed.
[Check 2 using method]
Use this menu when E:62:11 (Shift Lens Overheating (Pitch)) oc-
curred.
Click the [Check 2 Start] button, and the shift lens will move in up
and down directions. If the shift lens does not move, replace the
lens block.
Use this menu when E:62:11 (Shift Lens Overheating (Pitch)) oc-
curred.
Click the [Check 2 Start] button, and the shift lens will move in up
and down directions. If the shift lens does not move, replace the
lens block.
[Check 3 using method]
Use this menu when E:62:12 (Shift Lens Overheating (Yaw)) oc-
curred.
Click the [Check 3 Start] button, and the shift lens will move in left
and right directions. If the shift lens does not move, replace the
lens block.
Use this menu when E:62:12 (Shift Lens Overheating (Yaw)) oc-
curred.
Click the [Check 3 Start] button, and the shift lens will move in left
and right directions. If the shift lens does not move, replace the
lens block.
Click on the first or last page to see other HDR-CX6EK / HDR-CX7 / HDR-CX7E / HDR-CX7EK / HDR-CX7K (serv.man4) service manuals if exist.