HDR-CX6EK, HDR-CX7, HDR-CX7E, HDR-CX7EK, HDR-CX7K (serv.man4) - Sony Movie Service Manual (repair manual). Page 16

6-15

HDR-CX6EK/CX7/CX7E/CX7K/CX7EK_ADJ

6) After that, the following screen is displayed during the execu-

tion of “5. COMPONENT OUT Y Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Y signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Y signals satisfies the specified value, and
click the [End] button in the screen.

7) After that, the following screen is displayed during the execu-

tion of “6. COMPONENT OUT Pb Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Pb signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pb signals satisfies the specified value,
and click the [End] button in the screen.

8) After that, the following screen is displayed during the execu-

tion of “7. COMPONENT OUT Pr Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Pr signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pr signals satisfies the specified value,
and click the [End] button in the screen.

9) If the [End] button is clicked, “8. Release of Data Setting dur-

ing Video Adj.” will be executed.

10) Upon successful completion of all item the VIDEO Adjust-

ment, the following message is displayed. Click the [OK] but-
ton.