HDR-CX500, HDR-CX500E, HDR-CX500V, HDR-CX500VE, HDR-CX505VE, HDR-CX520, HDR-CX520E, HDR-CX520V, HDR-CX520VE (serv.man2) - Sony Movie Service Manual (repair manual). Page 9

Read Sony HDR-CX500 / HDR-CX500E / HDR-CX500V / HDR-CX500VE / HDR-CX505VE / HDR-CX520 / HDR-CX520E / HDR-CX520V / HDR-CX520VE (serv.man2) Service Manual online

1-2
ENGLISH
JAPANESE
ENGLISH
JAPANESE
HDR-CX500/CX500E/CX500V/CX500VE/CX505VE/
CX520/CX520E/CX520V/CX520VE_L2
1-3. SELF-DIAGNOSIS  FUNCTION
1-3-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the LCD screen what to
do. This function consists of two display; self-diagnosis display and
service mode display.
Details of the self-diagnosis functions are provided in the Instruction
manual.
1-3-2. Self-diagnosis Display
When problems occur while the unit is operating, the counter of the
LCD screen shows a 4-digit display consisting of an alphabet and
numbers, which blinks at 3.2 Hz. This 5-character display indicates
the “repaired by:”, “block” in which the problem occurred, and
“detailed code” of the problem.
1 1
3 1
C
Repaired by:
Refer to “1-3-3. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
LCD screen
C : 3 1 : 1 1
1-3-3. Self-diagnosis Code Table
C
C
C
C
C
E
E
E
Block
Function
0
4
0
6
1
3
1
3
3
2
2
0
6
1
6
1
Detailed
Code
0
0
0
0
0
1
0
2
6
0
0
0
1
0
1
1
Symptom/State
Non-standard battery is used.
The battery pack temperature is high.
“Memory Stick Duo” is unformatted.
“Memory Stick Duo” is broken.
Access error
Difficult to adjust focus
(Cannot initialize focus)
Flash memory data are rewritten.
Zoom operations fault
(Cannot initialize zoom lens.)
The abnormalities in initialization of
the focus lens and the abnormalities in
initialization of the zoom lens occurred
simultaneously.
Self-diagnosis Code
Repaired b
y:
Correction
Use the InfoLITHIUM battery.
Change the battery pack or place it in a cool place.
Format the “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Remove the power source. Reconnect it again and operate your
camcorder again
Retry turn the power on by the power switch. If it does not
recover, check the focus MR sensor of lens block (pin e;, ea of
CN1010 on the VC-575 board). If it is OK, check the focus
motor drive IC (IC5201 on the VC-575 board).
Make flash memory data correct value. (Note 1)
Inspect the lens block zoom MR sensor (pin ef, eg of CN1010
on the VC-575 board) when zooming is performed when the
zoom lever is operated, or the zoom motor drive circuit (IC5201
on the VC-575 board) when zooming is not performed.
Check both C: 32: 60 and E: 61: 10 of the self-diagnosis code.
Note 1 : Start the Adjust Manual in the Adjust Station and refer to the “Destination data write”.
Page of 99
Display

Click on the first or last page to see other HDR-CX500 / HDR-CX500E / HDR-CX500V / HDR-CX500VE / HDR-CX505VE / HDR-CX520 / HDR-CX520E / HDR-CX520V / HDR-CX520VE (serv.man2) service manuals if exist.