HDR-CX250, HDR-CX250E, HDR-CX260E, HDR-CX260V, HDR-CX260VE, HDR-CX270E, HDR-CX270V (serv.man2) - Sony Movie Service Manual (repair manual). Page 27

HDR-CX250/CX250E/CX260E/CX260V/CX260VE/CX270E/CX270V_L2

3-1E

Assembly-1: Installation Cautions of the Speaker Unit.

Lib

1

Pass the DC Speaker harness (Black, Red) in the two libs.

Assembly-2: How to distinguish the side of Optical Filter Block 

facing to Lens Device

• IR cut coating surface
  The red coating is reflected.

• The other surface
  The red coating is 
  not reflected.

• Side view
  The red belt
  is seen.

Lens Device side

Lens Device side

Hold it with tweezers or the like.

Optical Filter  Block  

The one side of the Optical Filter Block has treatedwith IR cut coating.
Mount the Optical Filter Block  facing the IR cut coated side to the lens
device.Distinguish the IR cut coated side from the other byapplying the
fluorescent light to the Optical Filter Block in the dark place(cut off the
outside light).

Assembly-4:  The Method of attachment of Cover (A), Cover (B).

1

Install the two covers (B) and slide its.

2

Install the two covers (A) and slide its.

Cover (A)

Cover (B)

Cover (B)

Claw

Claw

Cover (A)

Cover (B)

Cover (B)

Cover (A)

Cover (A)

Claw

Claw

Assembly-3: The Method of installation of FP-1487 Flexible 

Board.

1

Fold dotted line parts of the FP-1487 flexible board
as shown in figure.

2 times

FP-1487 Flexible Board

Hinge Assy

FP-1487 Flexible Board

Hinge Cover
(M (375))

Boss

2

Insert the FP-1487 Flexible Board to the Hinge Cover
(M(375)) as shown in figure.
And Roll the FP-1487 flexible board 2 times in 
the hinge assy as shown in figure.

Mountain fold

Mountain fold

Adhesive tape

Adhesive tape

Adhesive tape

Valley fold

Assembly-5: The Method of attachment of Barrier Motor.

Install the magnet, coil yoke, coil, and the yoke.

Shaft

Magnet

Magnet

Magnet

Coil Yoke

Cutout

Lever

Shaft

Coil Yoke

Coil

Coil

Yoke

Yoke