HDR-CX240, HDR-CX240E, HDR-PJ240, HDR-PJ240E, HDR-PJ270, HDR-PJ270E, HDR-PJ275 (serv.man2) - Sony Movie Service Manual (repair manual). Page 18

HDR-CX240/CX240E/PJ240/PJ240E/PJ270/PJ270E/PJ275_L2

3-1E

Assembly-1: The Method of attachment of FP-2184/2193 Flex-

ible Board

1

Fold dotted line parts of the FP-2184/FP-2193 flexible 
board as shown in figure.

Adhesive tape

Adhesive tape

Adhesive tape

Adhesive tape

Adhesive tape

Adhesive tape

Valley fold

Valley fold

Mountain fold

FP-2193 
Flexible Board

FP-2184 
Flexible Board

Mountain fold

Valley fold

2

Roll the FP-2184/2193 Flexible Board 2 times 
in the Hinge Assy as shown in figure.

3

Install the Cover (M) Hinge/Cover (C) Hinge.

Cover (M) Hinge

Cover (C) Hinge

2 Times

4

Attach the FP-2184/2193 Flexible Board board
as shown in figure.

Flexible Board

Hinge Assy

FP-2184/2193
Flexible Board

Assembly-2: How to distinguish the side of Optical Filter Block 

facing to Lens Device

• IR cut coating surface
  The red coating is reflected.

• The other surface
  The red coating is 
  not reflected.

• Side view
  The red belt
  is seen.

Lens Device side

Lens Device side

Hold it with tweezers or the like.

Optical Filter  Block

The one side of the Optical Filter Block has treated with IR cut coating.
Mount the Optical Filter Block  facing the IR cut coated side to the lens
device. Distinguish the IR cut coated side from the other by applying the
fluorescent light to the Optical Filter Block in the dark place (cut off the
outside light).